
Kerakoll WaterproofingNo. 12 / 19
Aquastop Flex Technical Data Sheet (TDS)
Certified, two-component, anti-alkali and chlorine-resistant, mineral membrane for flexible waterproofing with high levels of adhesion and durability of substrates before laying wi
Two component mineral membranes are mixed on site from powder and liquid, and Aquastop Flex is the certified, anti alkali and chlorine resistant member of the Aquastop range. It is a flexible waterproofing layer applied to the substrate before tiles go down with adhesive, and the chlorine resistance is what makes it the choice for swimming pools and plant rooms rather than a general purpose coating.
- Flexible waterproofing of substrates before laying with adhesives
- Swimming pools and water retaining areas
- Areas exposed to alkalis and chlorine
- Wet areas, bathrooms and balconies before tiling
- Substrates needing high adhesion and durability
Build a list across products and send it once, or ask about Aquastop Flex on WhatsApp now.
- Class
- EN 1504-2
- Consumption
- 1.92 kg/m² over 2 coats
- Pack we stock
- 12.5 kg
- Colour
- Part A light ready-mixed compound / Part B white latex
About Aquastop Flex
Adhesion and durability are both stated as high, so the tile bed sits on the membrane as part of one system. Classification is EN 1504-2. Supplied in a 12.5 kg bag, with coverage of about 2 kg per square metre and a pot life of one hour. Shelf life is 12 months. Mix only what the crew can place inside that hour.
Documentation
Related documentation
Technical data sheet
0.4 MB · PDF
Aquastop Flex as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Layers
The sheet calls for 2 to 3.
As published in the data sheet
96.0kg
- Spreader, rigid fibre brush or spray, one of two layers: 0.96 kg/m2
- 2 coats
- over 50 m2
Order 6 packs of 17.5 kg unit, part A 12.5 kg bag plus part B 5 kg can
Taken from the Aquastop Flex data sheet: Coverage: approx. 1.92 kg/m2 per 2 layers. No site allowance is added unless you turn one on. Two figures on the same sheet disagree by four percent and neither is averaged here. The technical table, used for the figure shown, prints Coverage approx. 1.92 kg/m2 per 2 layers. The application paragraph prints a total minimum thickness of 1.2 mm which can be obtained by using 2 kg/m2, and the abstract prints two coats for an overall coverage of approx. 2 kg/m2. The 0.96 kg/m2 per layer shown is half the printed table figure, a division we performed. Waterproofing swimming pools, reservoirs and basements with Aquastop AR1 reinforcement mesh is quoted separately at approx. 3 kg/m2.
Application
Where it is used.
- 01Flexible waterproofing of substrates before laying with adhesives
- 02Swimming pools and water retaining areas
- 03Areas exposed to alkalis and chlorine
- 04Wet areas, bathrooms and balconies before tiling
- 05Substrates needing high adhesion and durability
Specification
Technical data.
- EN 1504-2
- EN 14891
| Classification | EN 1504-2 |
|---|---|
| Coverage | ≈ 2 kg/m² |
| Pack size | 12.5 kg bag |
| Pot life | 1 h |
| Colours | Part A light ready-mixed compound / Part B white latex |
| Mixing ratio | Part A : Part B = 2.5 : 1 |
| Application temperature | +5 deg C to +45 deg C |
| Consistency | Part A light ready-mixed compound / Part B white latex |
| Storage and shelf life | 12 months |
| Product type | Certified, two-component, anti-alkali and chlorine-resistant, mineral membrane for flexible waterproofing with high levels of adhesion and durability of substrates before laying wi |
Typical values as Kerakoll prints them in the data sheet for Aquastop Flex. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
12.5 kg bag. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
Part A : Part B = 2.5 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
1 h. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Aquastop Flex, a waterproofing manufactured by Kerakoll, classified EN 1504-2. Certified, two-component, anti-alkali and chlorine-resistant, mineral membrane for flexible waterproofing with high levels of adhesion and durability of substrates before laying wi. Allow 1.92 kg/m2 over 2 coats, as published by the manufacturer. Mix at Part A : Part B = 2.5 : 1. Supplied in 12.5 kg bag. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Aquastop Flex |
|---|---|
| Manufacturer | Kerakoll |
| Type | Waterproofing |
| Classification | EN 1504-2 |
| Consumption | 1.92 kg/m2 over 2 coats |
| Pack size | 12.5 kg bag |
| Mixing ratio | Part A : Part B = 2.5 : 1 |
| Pot life | 1 h |
| Unit of measurement | m2 |
Frequently Asked Questions
Aquastop Flex is classified EN 1504-2 according to EN 14891, as stated in the manufacturer's technical data sheet.
As per the TDS: ≈ 2 kg/m²
12.5 kg bag
You can download the official Aquastop Flex technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Aquaform D
View TDS and specifications

Aquaform D Plus
View TDS and specifications

Aquaform D Small
View TDS and specifications

Aquaform OD - OD Plus
View TDS and specifications

Aquaform R
View TDS and specifications

Aquaform SD - VD
View TDS and specifications
All WaterproofingEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Aquastop Flex in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Aquastop Flex you need, or describe the job and we will work it out with you.