Morcem Dry SF Plus waterproofing pack
Pidilite Puma's own picture. The pack we stock: 25 kg.

Pidilite Puma WaterproofingNo. 01 / 1

Morcem Dry SF Plus Technical Data Sheet (TDS)

Waterproofing to EN 1062.

Two components, a 25 kg cementitious powder and a 10 kg latex, mix into a flexible crack bridging coating laid by trowel or roller at a total thickness of 2 to 2.5 mm including the reinforcing mesh. Morcem Dry SF Plus holds 5 bar of positive hydrostatic pressure to DIN 1048 and 3 bar negative, which is what qualifies it for swimming pools, concrete roof slabs, balconies, bathrooms, pile heads and shallow basement retaining walls where water can push from either side.

  • Waterproofing swimming pools
  • Concrete roof slabs and balcony floor slabs
  • Bathrooms and internal wet areas
  • Shallow basement retaining walls
  • Waterproofing pile heads
  • Potable water tanks
Data sheet0.1 MB

Build a list across products and send it once, or ask about Morcem Dry SF Plus on WhatsApp now.

Class
EN 1062
Pack we stock
25 kg
Thickness
2 - 2.5 mm

About Morcem Dry SF Plus

Elongation of 40 per cent to ASTM D412-16 Method A gives it the movement to bridge cracking, tensile strength is above 1 N/mm2, and the cured film is non-toxic so it can line a potable water tank. Apply between 5 and 35 degrees Celsius, never more than 2 mm wet per layer, and pond test after seven days of curing.

Documentation

Related documentation

  • Technical data sheet

    Revision 2026-05 · 0.1 MB · PDF

    Morcem Dry SF Plus as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

The sheet prints the build up but no rate: a second coat after the first has dried, a total thickness including the reinforcing fabric of 2 to 2.5 mm, a minimum of 2 mm, and not more than 2 mm of wet film per layer. There is no kg/m2 or kg/m2 per mm anywhere on it, so any quantity would be invented. Supplied as 25 kg powder plus 10 kg latex. Ask us and we will quote against the thickness.

There is no area calculator for Morcem Dry SF Plus because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Waterproofing swimming pools
  2. 02Concrete roof slabs and balcony floor slabs
  3. 03Bathrooms and internal wet areas
  4. 04Shallow basement retaining walls
  5. 05Waterproofing pile heads
  6. 06Potable water tanks

Specification

Technical data.

  • EN 1062
  • EN 14891
Morcem Dry SF Plus technical specifications from the manufacturer TDS
ClassificationEN 1062
Pack size25 kg component A, 10 kg component B
Bond strengthASTM D412 > 1 N/mm2
Application temperaturefrom 5ºC to 35ºC
Thickness2 - 2.5 mm
Water pressure resistanceDIN 1048 5 bar
ElongationASTM D412-16 Method A 40%

Typical values as Pidilite Puma prints them in the data sheet for Morcem Dry SF Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg component A, 10 kg component B. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

For quantity surveyors

BOQ clause.

Supply and apply Morcem Dry SF Plus, a waterproofing manufactured by Pidilite Puma, classified EN 1062. Applied thickness 2 - 2.5 mm. Supplied in 25 kg component a, 10 kg component b. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Morcem Dry SF Plus
ProductMorcem Dry SF Plus
ManufacturerPidilite Puma
TypeWaterproofing
ClassificationEN 1062
Thickness2 - 2.5 mm
Pack size25 kg component A, 10 kg component B
Unit of measurementm2

Frequently Asked Questions

Morcem Dry SF Plus is classified EN 1062 according to EN 14891, as stated in the manufacturer's technical data sheet.

25 kg component A, 10 kg component B

You can download the official Morcem Dry SF Plus technical data sheet as a PDF directly from this page, revision 2026-05, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Morcem Dry SF Plus in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Morcem Dry SF Plus you need, or describe the job and we will work it out with you.

Chat on WhatsApp