Unisystem PLUS G/2 - PLUS G/4 accessory pack
Profilpas's own picture of Unisystem PLUS G/2 - PLUS G/4.

Profilpas AccessoryNo. 16 / 18

Unisystem PLUS G/2 - PLUS G/4 Technical Data Sheet (TDS)

Profiles for wooden and laminate floors

Unisystem Plus G/2 and G/4 are stair nosings which allow for the expansion of floating wood or laminate floors, of thicknesses from 6.5mm to 15mm. Unisystem Plus G/2 and G/4 come in anodised aluminium and with Alcrom Plus wood patterns and the possibility of further customisation with PDS technology .

  • Trimming wooden, laminate and LVT floors
  • Transitions and expansion gaps in resilient flooring
Data sheet2.5 MB

Build a list across products and send it once, or ask about Unisystem PLUS G/2 - PLUS G/4 on WhatsApp now.

About Unisystem PLUS G/2 - PLUS G/4

UNISYSTEM PLUS and UNISYSTEM are two professional systems for floating wood and laminate floors, allowing them to expand as required. Both systems feature a natural aluminium base profile and covers performing a different function: • transition profiles for level floors; • profiles for floors at different heights, covering the difference in depths; end trims around wood or laminate floors; • perimeter profiles to provide a joint between the floor and the covering; • stair nosings. Lapiz Blue supplies Unisystem PLUS G/2 - PLUS G/4 across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 06.06.2022 · 2.5 MB · PDF

    Unisystem PLUS G/2 - PLUS G/4 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Application

Where it is used.

  1. 01Trimming wooden, laminate and LVT floors
  2. 02Transitions and expansion gaps in resilient flooring

Specification

Technical data.

Unisystem PLUS G/2 - PLUS G/4 technical specifications from the manufacturer TDS
Product typeProfiles for wooden and laminate floors
MaterialAl-Mg-Si aluminium, heat-treated in T6 (6060 T6)
StandardsUNI EN 717, UNI EN 12720, EN 13329

Typical values as Profilpas prints them in the data sheet for Unisystem PLUS G/2 - PLUS G/4. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

For quantity surveyors

BOQ clause.

Supply and apply Unisystem PLUS G/2 - PLUS G/4, a accessory manufactured by Profilpas. Profiles for wooden and laminate floors. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Unisystem PLUS G/2 - PLUS G/4
ProductUnisystem PLUS G/2 - PLUS G/4
ManufacturerProfilpas
TypeAccessory
Unit of measurementm2

Frequently Asked Questions

You can download the official Unisystem PLUS G/2 - PLUS G/4 technical data sheet as a PDF directly from this page, revision 06.06.2022, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Unisystem PLUS G/2 - PLUS G/4 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Profilpas from Dubai, Abu Dhabi and Sharjah. Send the quantity of Unisystem PLUS G/2 - PLUS G/4 you need, or describe the job and we will work it out with you.

Chat on WhatsApp