weberfloor Smooth FD self levelling pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 23 kg.

Weber (Saint-Gobain) Self LevellingNo. 13 / 13

weberfloor Smooth FD Technical Data Sheet (TDS)

Flooring

weberfloor smooth FD is a fine smoothing, and low shrinkage flooring leveling compound with fast drying property allowing fast covering with different type of floor finishes between 12 - 48 hours. It has good loads and abrasion resistance which enables the material to be used in areas subject to whirl activity that can result from trolleys and chairs.

  • Levelling floors before a finish
  • Industrial and commercial floors
Data sheet0.2 MB

Build a list across products and send it once, or ask about weberfloor Smooth FD on WhatsApp now.

Consumption
1.7 kg/m² per mm
Pack we stock
23 kg

About weberfloor Smooth FD

It provides a fast setting tough surface that will accept light traffic at 3-4 hours depending on the thickness and site conditions. The sheet gives consumption as 1.7 kg/m2/1mm thickness approx. It is supplied in the UAE in 23 kg. The mixing ratio is 4.8 to 5 liters water per 23 kg bag. Lapiz Blue supplies weberfloor Smooth FD across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 11.18-A · 0.2 MB · PDF

    weberfloor Smooth FD as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 1 to 20 mm.

As published in the data sheet

255kg

  • 1.7 kg/m2 per mm
  • 3 mm thick
  • over 50 m2

Order 12 packs of 23 kg bag

Send this quantity for a quote

Taken from the weberfloor Smooth FD data sheet: 1.7 kg/m2/1mm thickness approx. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Levelling floors before a finish
  2. 02Industrial and commercial floors

Specification

Technical data.

  • EN 13813
weberfloor Smooth FD technical specifications from the manufacturer TDS
Coverage1.7 kg/m2/1mm thickness approx.
Pack size23 kg
Mixing ratio4.8 to 5 liters water per 23 kg bag
Storage and shelf lifeOne year
ColorGrey powder
Grain size<1 mm
Powder density1.2 ±0.05
Covering time12 - 48 hours depending prevent or reduce adhesion.
Weberfloor smooth fdFLOORING
Carifying or grindingwarmer temperatures or use cold water. Pour the mixed
Eberfloor 4716 primeedge of material to pour fresh material into. Protect the
Ubstrate movementthe material before walking on if the temperature is below
Rimer application23°C. Ideal application temperature is between +5°C and
Roduct preparationadequate measures to protect it from exposure to direct
Anual applicationsunlight and hot winds. Make sure to keep the bags under
Berfloor smooth fdFLOORING
Rifying or grindingwarmer temperatures or use cold water. Pour the mixed
Erfloor 4716 primeedge of material to pour fresh material into. Protect the
Strate movementthe material before walking on if the temperature is below
Mer application23°C. Ideal application temperature is between +5°C and
Duct preparationadequate measures to protect it from exposure to direct
Ual applicationsunlight and hot winds. Make sure to keep the bags under
Product typeFlooring

Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberfloor Smooth FD. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

23 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

4.8 to 5 liters water per 23 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

One year in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply weberfloor Smooth FD, a self levelling manufactured by Weber (Saint-Gobain). Flooring. Allow 1.7 kg/m2 per mm, as published by the manufacturer. Mix at 4.8 to 5 liters water per 23 kg bag. Supplied in 23 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for weberfloor Smooth FD
Productweberfloor Smooth FD
ManufacturerWeber (Saint-Gobain)
TypeSelf Levelling
Consumption1.7 kg/m2 per mm
Pack size23 kg
Mixing ratio4.8 to 5 liters water per 23 kg bag
Unit of measurementm2

Frequently Asked Questions

As per the TDS: 1.7 kg/m2/1mm thickness approx.

23 kg

You can download the official weberfloor Smooth FD technical data sheet as a PDF directly from this page, revision 11.18-A, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

weberfloor Smooth FD in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberfloor Smooth FD you need, or describe the job and we will work it out with you.

Chat on WhatsApp