webercol Plus tile adhesive pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 25 kg.

Weber (Saint-Gobain) Tile AdhesiveNo. 04 / 12

webercol Plus Technical Data Sheet (TDS)

Tile fixing

webercol plus is a ready mix cement-based high performance polymer “latex” modified tile adhesive for inter-nal and externa use. It can be used in a damp environment, and is water resistant.

  • Fixing ceramic and porcelain tiles
  • Grouting tiled walls and floors
Data sheet0.2 MB

Build a list across products and send it once, or ask about webercol Plus on WhatsApp now.

Class
C2TE
Consumption
3 to 7 kg/m²
Pack we stock
25 kg

About webercol Plus

webercol plus is classified as C2TE according to EN12004. webercol plus is non-sagging and slip resistance «T» with ability to perform in extended open time conditions «E». webercol plus can be «S1» deformable when mixed with weberad 225 MB. (see instruction for use). Surface must be clean and free from greasy matters or dust. Substrate should have been sufficiently cured in a way that any shrinkage has already occurred. Weber states it as C2TE. The sheet gives consumption as 3 to 7 kg/m². It is supplied in the UAE in 25kg. Lapiz Blue supplies webercol Plus across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 06.26 · 0.2 MB · PDF

    webercol Plus as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

150 to 350kg

  • 3 to 7 kg/m²: 3 to 7 kg/m2
  • over 50 m2

Order 6 to 14 packs of 25 kg bag

Send this quantity for a quote

Taken from the webercol Plus data sheet: 3 to 7 kg/m². No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Fixing ceramic and porcelain tiles
  2. 02Grouting tiled walls and floors

Where it is not the right product

  • On heated screeds or substrates that move, where an S1 or S2 deformable grade is required

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • C2TE
  • EN 12004 and ISO 13007
webercol Plus technical specifications from the manufacturer TDS
ClassificationC2TE
Coverage3 to 7 kg/m²
Pack size25kg
Pot life2 hrs @ 20°C
Open time30 min. (EN 12004)
Mixing ratio5 to 6lit. per 25kg; 4 to 4.8lit. per 20kg
Storage and shelf life12 months
Service temperature-20°C to +70°C
AppearancePowder
CompositionCement, siliceous sand and
ColorGrey or white
Paste density1.55 ± 0.1
Wetting capability at 10 min90%
Shelf life12 months
Tal volatile organicNone (<5g/l) -
Mpounds voc(EPA Method 24)
St resultsclassification, each bag of 25kg webercol plus should be mixed
Nsile adhesion stregth accCon B
Product typeTile fixing

Typical values as Weber (Saint-Gobain) prints them in the data sheet for webercol Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

5 to 6lit. per 25kg; 4 to 4.8lit. per 20kg. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

2 hrs @ 20°C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply webercol Plus, a tile adhesive manufactured by Weber (Saint-Gobain), classified C2TE. Tile fixing. Allow 3 to 7 kg/m2, as published by the manufacturer. Mix at 5 to 6lit. per 25kg; 4 to 4.8lit. per 20kg. Supplied in 25kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for webercol Plus
Productwebercol Plus
ManufacturerWeber (Saint-Gobain)
TypeTile Adhesive
ClassificationC2TE
Consumption3 to 7 kg/m2
Pack size25kg
Mixing ratio5 to 6lit. per 25kg; 4 to 4.8lit. per 20kg
Pot life2 hrs @ 20°C
Open time30 min. (EN 12004)
Unit of measurementm2

Frequently Asked Questions

webercol Plus is classified C2TE according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: 3 to 7 kg/m²

25kg

You can download the official webercol Plus technical data sheet as a PDF directly from this page, revision 06.26, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

webercol Plus in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of webercol Plus you need, or describe the job and we will work it out with you.

Chat on WhatsApp