
Kerakoll AccessoryNo. 07 / 19
Aquastop 120 Technical Data Sheet (TDS)
Flexible NBR waterproof joint for perimeter and fractionizing joints in waterproofing systems
Aquastop 120 is a flexible NBR waterproofing joint, not a liquid membrane, and the two are ordered for different reasons. The tape treats perimeter joints and fractionizing joints, the lines where a floor meets a wall or where a large floor is divided, and it is worked into the waterproofing layer so movement along that line does not tear the membrane open.
- Perimeter joints in under tile waterproofing systems
- Fractionizing joints across large floor areas
- Under ceramic and porcelain tiles
- Under natural stone finishes
- Wall to floor junctions in wet areas
Build a list across products and send it once, or ask about Aquastop 120 on WhatsApp now.
- Supplied
- 50 m roll, 0.12 m wide, lapped 2 cm
- Colour
- green tape
About Aquastop 120
It bonds directly on application. Behind it a liquid product such as Aquastop Nanoflex or Aquastop Flex still has to cover the field of the floor. It is suitable under ceramic and porcelain tiles and natural stone. Order it by linear metre against the measured perimeter, and allow for corners and overlaps, because a run that falls short forces a joint in the wrong place.
Documentation
Related documentation
Technical data sheet
0.2 MB · PDF
Aquastop 120 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
Rolls are 50 m long, lapped 2 cm at each end.
As published in the data sheet
20.0m
- 20 m of detail
- plus 2 cm of lap at each roll end
Order 1 pack of 50 m roll, 120 mm section
Taken from the Aquastop 120 data sheet: Technical Data: Pack 50 m rolls. Section width approximately 20-80-20 mm (mesh/NBR/mesh). Thickness approximately 0.6 mm. Weight approximately 60 g/m. Instructions for use: the different elements must be connected using the waterproof membrane, overlapping the edges by at least 20 mm. No site allowance is added unless you turn one on. The sheet publishes no consumption rate because nothing is spread: Aquastop 120 is a thermoplastic NBR joint tape bonded into a coat of Aquastop Nanoflex, Nanodefense, Aquastop Fix or Aquastop Nanogum along a wall to floor or fractionising joint, so it is measured by the metre of joint. The 20 mm is the sheet's own figure for connecting one element to the next, and only the lap at the end of each roll is counted here. The internal corner, external corner and flange sections used at corners, edges, pipes and drains are counted off the drawing as pieces, and the waterproofing product it is bedded into is a separate product with its own rate.
Application
Where it is used.
- 01Perimeter joints in under tile waterproofing systems
- 02Fractionizing joints across large floor areas
- 03Under ceramic and porcelain tiles
- 04Under natural stone finishes
- 05Wall to floor junctions in wet areas
Specification
Technical data.
| Colours | green tape |
|---|---|
| Consistency | green tape |
| Product type | Flexible NBR waterproof joint for perimeter and fractionizing joints in waterproofing systems |
| Thickness | ≈ 0.6 mm |
Typical values as Kerakoll prints them in the data sheet for Aquastop 120. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
For quantity surveyors
BOQ clause.
Supply and apply Aquastop 120, a accessory manufactured by Kerakoll. Flexible NBR waterproof joint for perimeter and fractionizing joints in waterproofing systems. Allow 50 m roll, 0.12 m wide, lapped 2 cm, as published by the manufacturer. Applied thickness ≈ 0.6 mm. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Aquastop 120 |
|---|---|
| Manufacturer | Kerakoll |
| Type | Accessory |
| Supplied | 50 m roll, 0.12 m wide, lapped 2 cm |
| Thickness | ≈ 0.6 mm |
| Unit of measurement | m2 |
Frequently Asked Questions
You can download the official Aquastop 120 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Aquaform D
View TDS and specifications

Aquaform D Plus
View TDS and specifications

Aquaform D Small
View TDS and specifications

Aquaform OD - OD Plus
View TDS and specifications

Aquaform R
View TDS and specifications

Aquaform SD - VD
View TDS and specifications
All WaterproofingEvery Kerakoll product and the distributor page
Aquastop 120 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Aquastop 120 you need, or describe the job and we will work it out with you.