
Kerakoll AccessoryNo. 08 / 19
Aquastop AR1 Technical Data Sheet (TDS)
Special reinforcing mesh made of alkali-resistant glass fibre
Aquastop AR1 is a reinforcing mesh of alkali resistant glass fibre. Its job is tensile reinforcement inside a coating, not waterproofing: the mesh is embedded in the wet membrane so the cured film carries load across a weak line instead of relying on film thickness alone.
- Reinforcing waterproofing coatings at vulnerable details
- Embedding in the first coat of a cement based membrane
- Strengthening coatings over cement based substrates
- Detail reinforcement in Aquastop waterproofing systems
Build a list across products and send it once, or ask about Aquastop AR1 on WhatsApp now.
- Supplied
- 50 m roll, 1 m wide, lapped 10 cm
- Colour
- glass fibre
About Aquastop AR1
Alkali resistance is the whole point of the specification, because ordinary glass fibre degrades in the high pH of cement based products and the reinforcement would then quietly disappear. Use it where a detail needs strengthening rather than everywhere, and keep it distinct from the tapes, which treat movement joints, and from the liquid membranes themselves. It is ordered by roll. Lap the mesh as the data sheet requires and work it fully into the first coat, since mesh left sitting on the surface reinforces nothing.
Documentation
Related documentation
Technical data sheet
0.5 MB · PDF
Aquastop AR1 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
Rolls are 50 m long and 1 m wide, lapped 10 cm at every junction.
As published in the data sheet
55.6m
- 1 m wide roll lapped 10 cm covers 0.9 m of width
- over 50 m2
Order 2 packs of 50 m roll, 1 m wide
Taken from the Aquastop AR1 data sheet: Technical Data: Roll width approximately 1 m. Roll length 50 m. Instructions for use: lay Aquastop AR1 on the fresh waterproofing gel membrane overlapping the sheets by about 10 cm. No site allowance is added unless you turn one on. The sheet publishes no consumption rate because nothing is spread: Aquastop AR1 is an alkali resistant glass fibre mesh pressed into the first coat of Aquastop Nanoflex or Aquastop Flex and covered by the second. What it publishes is the roll and the 10 cm lap, so the quantity here is the length of mesh the area needs once that lap is allowed for. The sheet's weights, about 90 g/m2 uncoated and about 110 g/m2 primed, are there so the weight of mesh in the system can be verified and are not an ordering figure. The transverse laps at the end of each roll are not counted, so on a job made of many short runs order one roll over.
Application
Where it is used.
- 01Reinforcing waterproofing coatings at vulnerable details
- 02Embedding in the first coat of a cement based membrane
- 03Strengthening coatings over cement based substrates
- 04Detail reinforcement in Aquastop waterproofing systems
Specification
Technical data.
| Colours | glass fibre |
|---|---|
| Consistency | glass fibre |
| Product type | Special reinforcing mesh made of alkali-resistant glass fibre |
Typical values as Kerakoll prints them in the data sheet for Aquastop AR1. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
For quantity surveyors
BOQ clause.
Supply and apply Aquastop AR1, a accessory manufactured by Kerakoll. Special reinforcing mesh made of alkali-resistant glass fibre. Allow 50 m roll, 1 m wide, lapped 10 cm, as published by the manufacturer. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Aquastop AR1 |
|---|---|
| Manufacturer | Kerakoll |
| Type | Accessory |
| Supplied | 50 m roll, 1 m wide, lapped 10 cm |
| Unit of measurement | m2 |
Frequently Asked Questions
You can download the official Aquastop AR1 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Aquaform D
View TDS and specifications

Aquaform D Plus
View TDS and specifications

Aquaform D Small
View TDS and specifications

Aquaform OD - OD Plus
View TDS and specifications

Aquaform R
View TDS and specifications

Aquaform SD - VD
View TDS and specifications
All WaterproofingEvery Kerakoll product and the distributor page
Aquastop AR1 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Aquastop AR1 you need, or describe the job and we will work it out with you.