Aquastop BT waterproofing pack
Kerakoll's own picture of Aquastop BT.

Kerakoll WaterproofingNo. 09 / 19

Aquastop BT Technical Data Sheet (TDS)

Butyl adhesive tape coated in high-adhesion, non-woven, alkali-resistant polypropylene with a pre-cut, silicone film halfway along the back for perimeter joints that also have a bi

Aquastop BT is a self adhesive butyl tape, which separates it from an NBR joint bedded into adhesive. The butyl sticks on contact, the face is coated in high adhesion, non woven, alkali resistant polypropylene so a cement based membrane can bond to it, and a pre cut silicone film halfway along the back lets one half be released and fixed while the other stays protected.

  • Perimeter joints that also involve a bituminous sheath
  • Junctions with PVC, wood and polycarbonate
  • Junctions with glass, plastic and metal materials
  • Self adhesive detailing where a cementitious tape will not bond
  • Mixed material wall to floor junctions in waterproofing systems
Data sheet0.5 MB

Build a list across products and send it once, or ask about Aquastop BT on WhatsApp now.

Supplied
15 m roll, 0.15 m wide, lapped 0 cm
Pack we stock
roll 150 mm x 15 m
Colour
butyl adhesive tape coated on one side with non-woven

About Aquastop BT

That is the detail which makes it usable at perimeter joints involving a bituminous sheath, PVC, wood, polycarbonate, glass, plastic or metal, surfaces where a cementitious product has nothing to grip. Choose it for mixed material junctions and keep Aquastop 120 for ordinary perimeter and fractionizing joints. Clean the non porous face thoroughly first, because dust and release oils defeat butyl adhesion.

Documentation

Related documentation

  • Technical data sheet

    0.5 MB · PDF

    Aquastop BT as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

m

Rolls are 15 m long, lapped 0 cm at each end.

As published in the data sheet

20.0m

  • 20 m of detail
  • plus 0 cm of lap at each roll end

Order 2 packs of 15 m roll, 150 mm wide

Send this quantity for a quote

Taken from the Aquastop BT data sheet: Technical Data: Roll width 150 mm. Roll length 15 m. Total thickness 0,8 mm. Instructions for use: remove the lower half of the protective silicon film and fix Aquastop BT to the screed along the joint between wall and floor, then fix it to the wall. No site allowance is added unless you turn one on. The sheet publishes no consumption rate because nothing is spread: Aquastop BT is a butyl adhesive tape pressed along the wall to floor joint, so it is measured by the metre of that joint. The sheet prints the roll and no lap between successive pieces of tape. Nothing is added here for a lap between successive pieces, because the sheet prints none: that is a bound the sheet does not print, so allow for it on site. The 5 mm gap the sheet asks for between the membrane and the wall is a detail of the membrane above and not a lap in the tape. The waterproofing product that covers it, the Aquastop Fix sealant and the Aquastop 120 tape over the edge are separate products with their own rates.

Application

Where it is used.

  1. 01Perimeter joints that also involve a bituminous sheath
  2. 02Junctions with PVC, wood and polycarbonate
  3. 03Junctions with glass, plastic and metal materials
  4. 04Self adhesive detailing where a cementitious tape will not bond
  5. 05Mixed material wall to floor junctions in waterproofing systems

Specification

Technical data.

  • EN 14891
Aquastop BT technical specifications from the manufacturer TDS
Pack sizeroll 150 mm x 15 m
Coloursbutyl adhesive tape coated on one side with non-woven
Mixing ratio100%
Consistencybutyl adhesive tape coated on one side with non-woven
Product typeButyl adhesive tape coated in high-adhesion, non-woven, alkali-resistant polypropylene with a pre-cut, silicone film halfway along the back for perimeter joints that also have a bi

Typical values as Kerakoll prints them in the data sheet for Aquastop BT. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

roll 150 mm x 15 m. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

100%. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

For quantity surveyors

BOQ clause.

Supply and apply Aquastop BT, a waterproofing manufactured by Kerakoll. Butyl adhesive tape coated in high-adhesion, non-woven, alkali-resistant polypropylene with a pre-cut, silicone film halfway along the back for perimeter joints that also have a bi. Allow 15 m roll, 0.15 m wide, lapped 0 cm, as published by the manufacturer. Mix at 100%. Supplied in roll 150 mm x 15 m. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Aquastop BT
ProductAquastop BT
ManufacturerKerakoll
TypeWaterproofing
Supplied15 m roll, 0.15 m wide, lapped 0 cm
Pack sizeroll 150 mm x 15 m
Mixing ratio100%
Unit of measurementm2

Frequently Asked Questions

roll 150 mm x 15 m

You can download the official Aquastop BT technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Aquastop BT in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Aquastop BT you need, or describe the job and we will work it out with you.

Chat on WhatsApp