
Kerakoll WaterproofingNo. 10 / 19
Aquastop Extreme Technical Data Sheet (TDS)
Reactive waterproofing product with high chemical resistance and high adhesion, for deformable substrates
Aquastop Extreme is a reactive waterproofing product, meaning it cures by chemical reaction rather than by drying, and it is specified where the substrate deforms and where chemical attack is expected. High adhesion and high chemical resistance are the two properties Kerakoll puts first, and both point at the same situation: a surface that moves under load or temperature, carrying a finish that cannot be lifted later to make repairs.
- Waterproofing deformable substrates
- Surfaces exposed to chemical attack
- Liquid applied membrane over floors and walls
- Projects needing high adhesion to difficult substrates
Build a list across products and send it once, or ask about Aquastop Extreme on WhatsApp now.
- Consumption
- 1.3 kg/m² over 2 coats
- Pack we stock
- 6 kg
About Aquastop Extreme
It is a liquid applied membrane covering the field of a floor or wall, so joints and junctions still need the Aquastop tapes alongside it. Pot life is one hour, so mix in batches matched to the area a crew can cover in that time. Shelf life is 18 months. On a hot UAE site, expect the usable working time to run short of the hour.
Documentation
Related documentation
Technical data sheet
0.5 MB · PDF
Aquastop Extreme as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats, 0.5 mm per coat
The sheet calls for 2 to 3.
As published in the data sheet
65.0kg
- Smooth spreader, 0.5 mm per coat: 0.65 kg/m2
- 2 coats
- over 50 m2
Order 11 packs of 6 kg monopack bucket
Taken from the Aquastop Extreme data sheet: Coverage: approx. 1.3 kg/m2 per mm of thickness. Minimum thickness per coat: approx. 0.5 mm. Create a total thickness of hardened product of at least 1 mm. No site allowance is added unless you turn one on. The printed rate is 1.3 kg/m2 per mm of thickness. The 0.65 kg/m2 per coat shown here is that rate at the sheet's own minimum coat thickness of 0.5 mm, a multiplication we performed. The sheet also prints a separate figure for joints, approx. 1.6 kg for 10 m of 10 x 10 mm joint, which is not an area rate and is not offered here. The 0.2 and 0.3 to 0.4 kg/m2 figures in the instructions belong to the EP21 primer, not to this product.
Application
Where it is used.
- 01Waterproofing deformable substrates
- 02Surfaces exposed to chemical attack
- 03Liquid applied membrane over floors and walls
- 04Projects needing high adhesion to difficult substrates
Specification
Technical data.
- EN 14891
| Coverage | approx. 0.2 kg/m² |
|---|---|
| Pack size | 6 kg |
| Pot life | 1 h |
| Mixing ratio | part A : part B = 11 : 1 |
| Application temperature | +10 deg C to +30 deg C |
| Consistency | Part A: grey paste / Part B: straw-coloured liquid |
| Storage and shelf life | 18 months |
| Product type | Reactive waterproofing product with high chemical resistance and high adhesion, for deformable substrates |
Typical values as Kerakoll prints them in the data sheet for Aquastop Extreme. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
6 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
part A : part B = 11 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
1 h. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
18 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Aquastop Extreme, a waterproofing manufactured by Kerakoll. Reactive waterproofing product with high chemical resistance and high adhesion, for deformable substrates. Allow 1.3 kg/m2 over 2 coats, as published by the manufacturer. Mix at part A : part B = 11 : 1. Supplied in 6 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Aquastop Extreme |
|---|---|
| Manufacturer | Kerakoll |
| Type | Waterproofing |
| Consumption | 1.3 kg/m2 over 2 coats |
| Pack size | 6 kg |
| Mixing ratio | part A : part B = 11 : 1 |
| Pot life | 1 h |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: approx. 0.2 kg/m²
6 kg
You can download the official Aquastop Extreme technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Aquaform D
View TDS and specifications

Aquaform D Plus
View TDS and specifications

Aquaform D Small
View TDS and specifications

Aquaform OD - OD Plus
View TDS and specifications

Aquaform R
View TDS and specifications

Aquaform SD - VD
View TDS and specifications
All WaterproofingEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Aquastop Extreme in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Aquastop Extreme you need, or describe the job and we will work it out with you.