Aquastop Nanoflex waterproofing pack
Kerakoll's own picture. The pack we stock: 20 kg.

Kerakoll WaterproofingNo. 14 / 19

Aquastop Nanoflex Technical Data Sheet (TDS)

Certified, breathable, anti-alkali and chlorine-resistant, mineral coating for the flexible waterproofing with high levels of adhesion and durability of substrates before laying wi

Breathability is what sets Aquastop Nanoflex apart from the other Aquastop mineral products. It is a certified, anti alkali and chlorine resistant mineral coating for the flexible waterproofing of substrates before tiles are laid with adhesive, and because it breathes it lets vapour out of the substrate instead of trapping it beneath a sealed film, which is the mechanism that lifts coatings off a young screed.

  • Flexible waterproofing of substrates before laying with adhesives
  • Breathable waterproofing over substrates holding moisture
  • Areas exposed to alkalis and chlorine
  • Wet areas and balconies before tiling
  • Base membrane for Aquastop Traffic and Aquaform drains
Data sheet0.6 MB

Build a list across products and send it once, or ask about Aquastop Nanoflex on WhatsApp now.

Consumption
2.3 kg/m² over 2 coats
Pack we stock
20 kg
Colour
light grey ready-mixed waterproofing product

About Aquastop Nanoflex

Adhesion and durability are both stated as high. Supplied in 20 kg bags, with coverage of about 1.15 kg per square metre, an applied thickness of 2 to 3 mm and a pot life of one hour. Shelf life is 12 months. It covers the field only, so put Aquastop 120 or Aquastop BT for the perimeter joints on the same order.

Documentation

Related documentation

  • Technical data sheet

    0.6 MB · PDF

    Aquastop Nanoflex as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Coats, 1 mm per coat

The sheet calls for 2 to 3.

As published in the data sheet

115kg

  • Smooth spreader, 1 mm per coat: 1.15 kg/m2
  • 2 coats
  • over 50 m2

Order 6 packs of 20 kg bag with handle

Send this quantity for a quote

Taken from the Aquastop Nanoflex data sheet: Coverage: approx. 1.15 kg/m2 per mm of thickness. Minimum total thickness 2 mm or more. Maximum thickness per layer 1.5 mm or less. No site allowance is added unless you turn one on. The printed maximum is 1.5 mm per layer, so a thicker coat than 1 mm is allowed, and the printed minimum total is 2 mm, so one coat of 1 mm is below spec. The sheet applies the product with a smooth spreader only and prints no spray rate.

Application

Where it is used.

  1. 01Flexible waterproofing of substrates before laying with adhesives
  2. 02Breathable waterproofing over substrates holding moisture
  3. 03Areas exposed to alkalis and chlorine
  4. 04Wet areas and balconies before tiling
  5. 05Base membrane for Aquastop Traffic and Aquaform drains

Specification

Technical data.

  • EN 14891
Aquastop Nanoflex technical specifications from the manufacturer TDS
Coverage≈ 1.15 kg/m² per mm of thickness
Pack size20 kg bags
Pot life1 h
Colourslight grey ready-mixed waterproofing product
Mixing ratio≈ 5 - 6 l / 1 20 kg bag
Consistencylight grey ready-mixed waterproofing product
Storage and shelf life12 months
Product typeCertified, breathable, anti-alkali and chlorine-resistant, mineral coating for the flexible waterproofing with high levels of adhesion and durability of substrates before laying wi
Thickness2-3 mm

Typical values as Kerakoll prints them in the data sheet for Aquastop Nanoflex. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

20 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

≈ 5 - 6 l / 1 20 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

1 h. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Aquastop Nanoflex, a waterproofing manufactured by Kerakoll. Certified, breathable, anti-alkali and chlorine-resistant, mineral coating for the flexible waterproofing with high levels of adhesion and durability of substrates before laying wi. Allow 2.3 kg/m2 over 2 coats, as published by the manufacturer. Applied thickness 2-3 mm. Mix at ≈ 5 - 6 l / 1 20 kg bag. Supplied in 20 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Aquastop Nanoflex
ProductAquastop Nanoflex
ManufacturerKerakoll
TypeWaterproofing
Consumption2.3 kg/m2 over 2 coats
Thickness2-3 mm
Pack size20 kg bags
Mixing ratio≈ 5 - 6 l / 1 20 kg bag
Pot life1 h
Unit of measurementm2

Frequently Asked Questions

As per the TDS: ≈ 1.15 kg/m² per mm of thickness

20 kg bags

You can download the official Aquastop Nanoflex technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Aquastop Nanoflex in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Aquastop Nanoflex you need, or describe the job and we will work it out with you.

Chat on WhatsApp