Nanodefense waterproofing pack
Kerakoll's own picture. The pack we stock: 5 kg.

Kerakoll WaterproofingNo. 19 / 19

Nanodefense Technical Data Sheet (TDS)

Certified, organic, water-based, mineral waterproofing product for absorbent substrates in damp environments

Nanodefense is a certified, organic, water based waterproofing product for absorbent substrates in damp environments, and the words to notice are absorbent and water based. Being water based it is low odour and simple to clean up, which makes it workable inside occupied buildings; being formulated for absorbent substrates it is aimed at plaster, screed and board rather than dense or non porous surfaces.

  • Waterproofing absorbent substrates in damp environments
  • Bathroom and shower walls and floors before tiling
  • Plaster, screed and board substrates
  • Interior wet areas where a water based product is preferred
Data sheet0.3 MB

Build a list across products and send it once, or ask about Nanodefense on WhatsApp now.

Consumption
3 kg/m² over 2 coats
Pack we stock
5 kg

About Nanodefense

The typical use is a bathroom or shower wall and floor before tiling. Supplied in 5 kg buckets, with coverage of about 1.5 kg per square metre and a shelf life of 12 months. It is a liquid membrane for the field of the surface, so corners and floor to wall joints still want an Aquastop tape, which is where leaks in UAE wet rooms usually begin.

Documentation

Related documentation

  • Technical data sheet

    0.3 MB · PDF

    Nanodefense as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Coats, 1 mm per coat

The sheet calls for 2 to 3.

As published in the data sheet

150kg

  • Steel spreader, short bristle roller or flat brush, 1 mm per coat: 1.5 kg/m2
  • 2 coats
  • over 50 m2

Order 10 packs of 15 kg bucket, also 5 kg

Send this quantity for a quote

Taken from the Nanodefense data sheet: Coverage: approx. 1.5 kg/m2. Minimum thickness per coat approx. 1 mm, minimum dry thickness per coat approx. 500 micron. No site allowance is added unless you turn one on. The sheet does not say whether its 1.5 kg/m2 is per coat or for the finished job, and the two readings differ by a factor of two. It is treated here as per coat because at the sheet's own specific weight of 1.44 kg per cubic decimetre, 1.5 kg/m2 is a 1 mm wet film, which is exactly the printed minimum thickness per coat, and the application paragraph asks for a second coat once the first has hardened. The abstract on the same sheet quotes 1.5 kg/m2 for the waterproofing as a whole. Check the figure with us on a large job.

Application

Where it is used.

  1. 01Waterproofing absorbent substrates in damp environments
  2. 02Bathroom and shower walls and floors before tiling
  3. 03Plaster, screed and board substrates
  4. 04Interior wet areas where a water based product is preferred

Specification

Technical data.

  • EN 14891
Nanodefense technical specifications from the manufacturer TDS
Coverage1.5 kg/m2
Pack size15 / 5 kg buckets
Application temperature+5 deg C to +40 deg C
Consistencylight blue paste
Storage and shelf life12 months
Product typeCertified, organic, water-based, mineral waterproofing product for absorbent substrates in damp environments

Typical values as Kerakoll prints them in the data sheet for Nanodefense. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

15 / 5 kg buckets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Nanodefense, a waterproofing manufactured by Kerakoll. Certified, organic, water-based, mineral waterproofing product for absorbent substrates in damp environments. Allow 3 kg/m2 over 2 coats, as published by the manufacturer. Supplied in 15 / 5 kg buckets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Nanodefense
ProductNanodefense
ManufacturerKerakoll
TypeWaterproofing
Consumption3 kg/m2 over 2 coats
Pack size15 / 5 kg buckets
Unit of measurementm2

Frequently Asked Questions

As per the TDS: 1.5 kg/m2

15 / 5 kg buckets

You can download the official Nanodefense technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Nanodefense in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Nanodefense you need, or describe the job and we will work it out with you.

Chat on WhatsApp