
Kerakoll WaterproofingNo. 18 / 19
Metric Osmotic Technical Data Sheet (TDS)
Waterproofing, osmotic, cement-based protective product for concrete
Osmotic waterproofing works through the concrete rather than on top of it, and Metric Osmotic is the cement based version Kerakoll supplies for that purpose. It is applied as a waterproofing and protective product to concrete, and because the action is osmotic it suits structures where water pushes from the far face and a surface film would simply be driven off, so tanks, basements and lift pits.
- Waterproofing and protecting concrete structures
- Osmotic waterproofing where water acts on the far face
- Water tanks, basements and lift pits
- Concrete surface protection to EN 1504-2
- Structural repair and protection works
Build a list across products and send it once, or ask about Metric Osmotic on WhatsApp now.
- Class
- EN 1504-2
- Consumption
- 2.8 to 3 kg/m² over 2 coats
- Pack we stock
- 25 kg
- Colour
- white or grey powder
About Metric Osmotic
Classification is EN 1504-2, the standard for concrete surface protection, which is the line a consultant looks for on a repair specification. Supplied in 25 kg bags, with a pot life of one hour and a shelf life of 12 months. This is a concrete protection product, so it belongs with the structural repair materials on a job rather than with the under tile Aquastop system.
Documentation
Related documentation
Technical data sheet
0.4 MB · PDF
Metric Osmotic as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
Coats, 1 mm per coat
The sheet calls for 2 to 3.
As published in the data sheet
150kg
- Spreader application, 1 mm per coat: 1.5 kg/m2
- 2 coats
- over 50 m2
Order 6 packs of 25 kg bag
Taken from the Metric Osmotic data sheet: Coverage: for spreader application approx. 1.5 kg/m2 per mm of thickness; for brush application approx. 1.4 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. The printed minimum thickness is 2 mm, which two coats of 1 mm meet, with a maximum of 3 mm per layer and 6 mm overall. The sheet asks for a second coat crosswise to the first, within 24 hours. A pump for spraying low thickness coverings is mentioned but no spray rate is printed.
Application
Where it is used.
- 01Waterproofing and protecting concrete structures
- 02Osmotic waterproofing where water acts on the far face
- 03Water tanks, basements and lift pits
- 04Concrete surface protection to EN 1504-2
- 05Structural repair and protection works
Specification
Technical data.
- EN 1504-2
- EN 14891
| Classification | EN 1504-2 |
|---|---|
| Coverage | - for spreader application ≈ 1.5 kg/m² per mm of thickness - for brush application ≈ 1.4 kg/m² per mm of thickness Values taken |
| Pack size | 25 kg bags |
| Pot life | 1 h |
| Colours | white or grey powder |
| Mixing ratio | 4% |
| Application temperature | +5 deg C to +35 deg C |
| Consistency | white or grey powder |
| Storage and shelf life | 12 months |
| Product type | Waterproofing, osmotic, cement-based protective product for concrete |
Typical values as Kerakoll prints them in the data sheet for Metric Osmotic. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
4%. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
1 h. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Metric Osmotic, a waterproofing manufactured by Kerakoll, classified EN 1504-2. Waterproofing, osmotic, cement-based protective product for concrete. Allow 2.8 to 3 kg/m2 over 2 coats, as published by the manufacturer. Mix at 4%. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Metric Osmotic |
|---|---|
| Manufacturer | Kerakoll |
| Type | Waterproofing |
| Classification | EN 1504-2 |
| Consumption | 2.8 to 3 kg/m2 over 2 coats |
| Pack size | 25 kg bags |
| Mixing ratio | 4% |
| Pot life | 1 h |
| Unit of measurement | m2 |
Frequently Asked Questions
Metric Osmotic is classified EN 1504-2 according to EN 14891, as stated in the manufacturer's technical data sheet.
As per the TDS: - for spreader application ≈ 1.5 kg/m² per mm of thickness - for brush application ≈ 1.4 kg/m² per mm of thickness Values taken
25 kg bags
You can download the official Metric Osmotic technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Aquaform D
View TDS and specifications

Aquaform D Plus
View TDS and specifications

Aquaform D Small
View TDS and specifications

Aquaform OD - OD Plus
View TDS and specifications

Aquaform R
View TDS and specifications

Aquaform SD - VD
View TDS and specifications
All WaterproofingEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Metric Osmotic in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Metric Osmotic you need, or describe the job and we will work it out with you.