
Kerakoll WaterproofingNo. 17 / 19
EP21 Technical Data Sheet (TDS)
Resin for the consolidation of absorbent substrates, the creation of finishings and epoxy screeds, and waterproofing of cement-based substrates with residual moisture
EP21 is a resin with three distinct uses, which is why it turns up in more than one part of the Kerakoll range. It consolidates absorbent substrates, binding a weak or dusty surface so a finish can be laid over it.
- Consolidating absorbent substrates before laying
- Creating finishings and epoxy screeds
- Waterproofing cement based substrates with residual moisture
- Priming weak or dusty cement surfaces
Build a list across products and send it once, or ask about EP21 on WhatsApp now.
- Consumption
- 0.2 to 0.4 kg/m²
- Pack we stock
- 2.5 kg
- Colour
- Part A transparent liquid
About EP21
It forms finishings and epoxy screeds. And it waterproofs cement based substrates that still hold residual moisture, the use that gets it specified on a tight programme where a screed cannot be left to dry. Supplied in a 2.5 kg can, with coverage of about 0.2 kg per square metre, a pot life of 30 minutes and an open time of 30 minutes. Shelf life is 12 months. Thirty minutes is a short window in UAE summer conditions, so mix small quantities and keep the material out of the sun.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
EP21 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
15.0 to 20.0kg
- As a moisture barrier against residual humidity: 0.3 to 0.4 kg/m2
- over 50 m2
Order 5 to 6 packs of 3.5 kg unit, part A 2.5 kg can plus part B 1 kg bottle
Taken from the EP21 data sheet: Coverage: to stabilise on the surface approx. 0.2 kg/m2; to strengthen on and below the surface approx. 0.3 - 0.4 kg/m2; to use as moisture barrier against residual humidity approx. 0.3 - 0.4 kg/m2. No site allowance is added unless you turn one on. No coats control is offered because each printed figure is a total for the use named, not a rate per coat: the waterproofing figure of 0.3 to 0.4 kg/m2 already covers the two coats the instructions ask for. The fourth printed row, for epoxy screeds mixed 1:10 with Quarzo 5.12, is approx. 0.2 kg/m2 per mm of thickness, a different basis, and is not offered here.
Application
Where it is used.
- 01Consolidating absorbent substrates before laying
- 02Creating finishings and epoxy screeds
- 03Waterproofing cement based substrates with residual moisture
- 04Priming weak or dusty cement surfaces
Specification
Technical data.
- EN 14891
| Coverage | ≈ 0.2 kg/m² |
|---|---|
| Pack size | 2.5 kg can |
| Pot life | 30 min |
| Open time | 12 h |
| Colours | Part A transparent liquid |
| Mixing ratio | Part A : Part B = 2.5 : 1 |
| Application temperature | +10 deg C to +35 deg C |
| Consistency | Part A transparent liquid |
| Storage and shelf life | 12 months |
| Product type | Resin for the consolidation of absorbent substrates, the creation of finishings and epoxy screeds, and waterproofing of cement-based substrates with residual moisture |
Typical values as Kerakoll prints them in the data sheet for EP21. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
2.5 kg can. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
Part A : Part B = 2.5 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
30 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply EP21, a waterproofing manufactured by Kerakoll. Resin for the consolidation of absorbent substrates, the creation of finishings and epoxy screeds, and waterproofing of cement-based substrates with residual moisture. Allow 0.2 to 0.4 kg/m2, as published by the manufacturer. Mix at Part A : Part B = 2.5 : 1. Supplied in 2.5 kg can. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | EP21 |
|---|---|
| Manufacturer | Kerakoll |
| Type | Waterproofing |
| Consumption | 0.2 to 0.4 kg/m2 |
| Pack size | 2.5 kg can |
| Mixing ratio | Part A : Part B = 2.5 : 1 |
| Pot life | 30 min |
| Open time | 12 h |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: ≈ 0.2 kg/m²
2.5 kg can
You can download the official EP21 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Aquaform D
View TDS and specifications

Aquaform D Plus
View TDS and specifications

Aquaform D Small
View TDS and specifications

Aquaform OD - OD Plus
View TDS and specifications

Aquaform R
View TDS and specifications

Aquaform SD - VD
View TDS and specifications
All WaterproofingEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
EP21 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of EP21 you need, or describe the job and we will work it out with you.