Aquastop Traffic waterproofing pack
Kerakoll's own picture. The pack we stock: 10 kg.

Kerakoll WaterproofingNo. 16 / 19

Aquastop Traffic Technical Data Sheet (TDS)

Protective, non-slip, water-based covering, for Aquastop Nanoflex

Aquastop Traffic is the covering that lets an Aquastop Nanoflex membrane stay exposed. It is a protective, non slip, water based coating applied over Nanoflex where no tile or stone finish will follow, on a plant deck, a service area or a walkway, and the non slip texture is why it is specified rather than simply leaving the membrane bare.

  • Protecting exposed Aquastop Nanoflex membranes
  • Non slip finish on walkways and service areas
  • Plant decks and terraces left without a tile finish
  • Water based topcoat over mineral waterproofing
Data sheet0.3 MB

Build a list across products and send it once, or ask about Aquastop Traffic on WhatsApp now.

Consumption
0.7 kg/m² over 2 coats
Pack we stock
10 kg
Colour
Grey paste

About Aquastop Traffic

Supplied in 10 kg buckets, with coverage of about 0.7 kg per square metre. Shelf life is 18 months. It is a topcoat and not a waterproofing layer in its own right, so Nanoflex remains the product that excludes water while Aquastop Traffic takes the wear. On an exposed UAE terrace or plant deck, that wear layer decides how long the membrane underneath lasts.

Documentation

Related documentation

  • Technical data sheet

    0.3 MB · PDF

    Aquastop Traffic as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Coats

The sheet calls for 2 to 3.

As published in the data sheet

35.0kg

  • Smooth spreader, one of two coats: 0.35 kg/m2
  • 2 coats
  • over 50 m2

Order 4 packs of 10 kg bucket

Send this quantity for a quote

Taken from the Aquastop Traffic data sheet: Coverage: approx. 0.7 kg/m2 total (2 coats). Minimum thickness when dry approx. 0.4 mm. No site allowance is added unless you turn one on. The sheet prints a two coat total of 0.7 kg/m2. The 0.35 kg/m2 per coat shown is half that total, a division we performed. The second coat may be applied with a short bristle roller after diluting with up to 15 percent water, but only provided the total weight of product applied per square metre is unchanged, so dilution does not reduce the quantity.

Application

Where it is used.

  1. 01Protecting exposed Aquastop Nanoflex membranes
  2. 02Non slip finish on walkways and service areas
  3. 03Plant decks and terraces left without a tile finish
  4. 04Water based topcoat over mineral waterproofing

Specification

Technical data.

  • EN 14891
Aquastop Traffic technical specifications from the manufacturer TDS
Coverage≈ 0.7 kg/m² total (2 coats)
Pack size10 kg buckets
ColoursGrey paste
Application temperature+5 deg C to +35 deg C
ConsistencyGrey paste
Storage and shelf life18 months
Product typeProtective, non-slip, water-based covering, for Aquastop Nanoflex

Typical values as Kerakoll prints them in the data sheet for Aquastop Traffic. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

10 kg buckets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

18 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Aquastop Traffic, a waterproofing manufactured by Kerakoll. Protective, non-slip, water-based covering, for Aquastop Nanoflex. Allow 0.7 kg/m2 over 2 coats, as published by the manufacturer. Supplied in 10 kg buckets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Aquastop Traffic
ProductAquastop Traffic
ManufacturerKerakoll
TypeWaterproofing
Consumption0.7 kg/m2 over 2 coats
Pack size10 kg buckets
Unit of measurementm2

Frequently Asked Questions

As per the TDS: ≈ 0.7 kg/m² total (2 coats)

10 kg buckets

You can download the official Aquastop Traffic technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Aquastop Traffic in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Aquastop Traffic you need, or describe the job and we will work it out with you.

Chat on WhatsApp