Concrete additives and repair systems that keep structures strong
Concrete is only as good as its pour, cure, and aftercare. Whether you're improving fresh concrete workability, protecting rebar from chloride attack, or restoring cracked slabs and columns, Mapei concrete systems help you intervene at the right stage with the right product. At Lapiz Blue, we supply Mapei Concrete Additives UAE and Mapei Concrete Repair UAE solutions for new builds, refurbishment, and infrastructure maintenance. Share your scope, substrate condition, exposure, and structural intent and we'll guide you toward a practical system with documentation support.
Visit Mapei Official Website
Popular Products
Explore our most trusted concrete additives and repair systems solutions for professional installations.
Dynamon SX
High-performance superplasticizer for concrete with excellent water reduction and workability retention in hot climates.
Planitop 400 ME
Fiber-reinforced, shrinkage-compensated repair mortar specifically formulated for Middle East conditions.
Topcem Pronto
Quick-setting, ready-to-use binder for fast-track screeds, enabling floor covering installation within 24 hours.
Mapefill GP ME
Pourable, non-shrink grout for anchoring and filling voids, designed for hot climate performance in the Middle East.
Mapegrout ME06
Thixotropic, fiber-reinforced repair mortar for vertical and overhead concrete restoration in harsh Gulf conditions.
Mapegrout ME05
General-purpose structural repair mortar with controlled shrinkage for beams, columns, and slabs in Middle East projects.
Planitop 105 ME
One-component, rapid-setting repair mortar for quick fixes and surface restoration in demanding site conditions.
Applications & Best-Fit Scenarios
New concrete: improving workability, early strength, and reducing water demand with Mapei Admixtures
Corrosion protection: protecting reinforcement in chloride-exposed or carbonated concrete environments
Surface repair: patching spalled concrete, honeycombs, and surface defects with non-shrink repair mortar
Structural repair: restoring sections of beams, columns, slabs with structural-grade mortars
Crack injection: addressing cracks in concrete with injection resins or grouts for structural or waterproofing intent
Anchoring and bonding: preparing substrate and bonding new concrete to old with bonding agents and primers
Protective coatings: sealing repaired surfaces to resist further carbonation and moisture ingress
How to Choose the Right System
Identify the stage: are you working with fresh concrete (admixtures) or hardened concrete (repair)?
Define the intent: structural restoration, surface repair, waterproofing, crack treatment, or corrosion prevention
Confirm the substrate: is it carbonated, chloride-contaminated, cracked, or structurally compromised?
Assess exposure: interior dry, wet, exterior, marine, or chemical environment
Match product class: non-shrink mortar for general repair, structural mortar for load-bearing elements, injection for cracks
Plan surface prep: cleaning, roughening, priming, and rebar treatment often determine long-term success
Coordinate with coatings: protective finishes and anti-carbonation coatings may be needed after repair
Document properly: for consultant approvals and asset owners, use products with clear TDS, test data, and EN/BS compliance
Common Mistakes to Avoid
- Skipping rebar treatment when corrosion is present, leading to re-cracking after repair
- Using generic patching mortar for structural repairs that need engineered mortars
- Ignoring substrate prep (cleaning, wetting, priming) and expecting adhesion to just work
- Selecting admixtures without confirming compatibility with cement type and mix design
- Repairing without protective coating, leaving the repaired area exposed to the same attack that caused the damage
What You Can Expect
Coverage
UAE-wide delivery with export support on request
Availability
In stock, usually available, project order, and on request depending on the Mapei product and quantity
Branch Support
Supply coordination from Dubai, Abu Dhabi, and Sharjah
Technical Guidance
Help selecting products based on substrate condition, exposure, and repair intent
Documentation
TDS, SDS, EN/BS compliance references, and submittal support available
Quotations
BOQ-based quotations with system suggestions, alternatives if needed, and lead time clarity
Frequently Asked Questions
Mapei admixtures improve fresh concrete properties like workability, strength development, and durability. They're added during batching to achieve specific performance without changing mix proportions drastically.
Non-shrink repair mortar is designed to fill voids and repair surface defects without shrinking away from the substrate. Use it for cosmetic repairs, honeycombs, and shallow patching where structural performance isn't the priority.
When the repair must carry load or restore structural integrity, e.g. beam soffits, column corners, or slab sections. Structural mortars meet higher strength and bonding requirements.
Expose the rebar, remove rust and loose concrete, clean thoroughly, then apply a protective primer or passivating coat before applying repair mortar. Skipping this step risks re-corrosion.
Yes. Mapei offers injection resins and grouts for structural crack bonding or waterproofing. Share crack width, depth, and intent (structural or sealing) and we'll guide you to the right approach.
Yes. We provide TDS, SDS, EN/BS compliance data, and can help prepare submittal packages for consultant and client review.
Substrate type and condition, damage description, exposure (interior/exterior/marine), structural or non-structural intent, quantity, and timeline.
Yes. We deliver UAE-wide with export support available on request.
A System Approach to Concrete Repair
Mapei doesn't just sell repair mortars, they engineer systems. From diagnosis to surface prep, rebar treatment, repair application, and final protection, Mapei concrete repair products are designed to work together. That's why specifiers and contractors trust Mapei for infrastructure, parking structures, bridges, and building restoration, projects where "patch and hope" isn't good enough.
Admixtures That Support Better Concrete
Mapei concrete admixtures are formulated to improve workability, reduce water demand, accelerate or retard setting, and enhance durability, without compromising the mix design intent. Whether you're pouring in extreme heat, need early stripping, or want better pumpability, there's a Mapei admixture that fits.
Corrosion Protection and Long-Term Durability
Chloride attack and carbonation are the two biggest threats to reinforced concrete in the UAE. Mapei offers rebar primers, inhibitors, and protective coatings that extend service life and reduce future maintenance. If you're repairing today, protect for tomorrow.
Documentation and Compliance Support
Mapei products come with detailed TDS, SDS, and EN/BS compliance data. For projects with consultant oversight, asset owner requirements, or authority approvals, we help you assemble submittals that meet expectations.
Trust Lapiz Blue for Mapei Concrete Systems
As an authorized Mapei distributor in the UAE, Lapiz Blue supplies concrete additives, repair mortars, injection systems, and protective coatings with technical guidance and documentation support. We help you move from diagnosis to solution, not just technically, but commercially with clear quotations and delivery coordination.
Need a concrete repair or admixture solution?
WhatsApp us with your project scope and we'll guide you to the right Mapei system. Or email your BOQ for pricing, availability, documentation, and delivery planning.
Share these details for a quick response:
- Type of work: new pour (admixtures), repair, crack treatment, corrosion protection
- Substrate condition: carbonated, chloride-exposed, cracked, spalled
- Structural or non-structural intent
- Exposure: interior, exterior, marine, industrial
- Quantity (volume or area) and site location
- Any consultant specification or compliance requirement
