Precision Floor Leveling with Puma Morcem Floor Technology

Morcem® Floor Auto is the standard self-leveling compound suitable for most applications with normal curing times. Morcem® Floor Auto Plus is a fast-drying formulation that allows floor covering installation significantly sooner - typically within 4-24 hours depending on thickness, compared to several days for standard products. Choose Plus when project schedules require rapid turnaround.

Maximum single-pour thickness varies by product. Generally, thin-pour products are designed for 1-10mm applications, while thick-pour variants can achieve 10-50mm in a single application. For greater depths, multiple pours with appropriate curing between layers are recommended. Product technical data sheets specify exact thickness limits for each formulation.

Yes, specific Morcem® Floor products are designed for underfloor heating systems. These formulations accommodate the thermal movement of heated floors without cracking. It is important to follow heating system commissioning procedures - gradually increasing temperature after the self-leveler has cured - to prevent thermal shock.

Yes, primer application is essential for successful self-leveling installation. The primer seals the substrate, prevents air bubbles rising through the leveling compound, and ensures proper adhesion. Skipping primer is a common cause of self-leveling failures. Puma provides compatible primers for various substrate types.

Timing depends on the product and thickness applied. Morcem® Floor Auto Plus allows floor covering installation within hours for thin applications. Standard products typically require 1-3 days depending on thickness. Moisture-sensitive floor coverings like wood require full moisture content reduction, which takes longer. Always verify residual moisture levels before installing sensitive flooring.

Yes, Morcem® Floor products are formulated for pump application, enabling efficient coverage of large commercial and industrial areas. Pump application ensures consistent mixing, reduces labor requirements, and speeds installation. For smaller residential projects, hand mixing and pouring is equally effective.

Puma self-leveling compounds can be applied to concrete, cement screeds, and various existing floor surfaces when properly prepared and primed. Substrates must be structurally sound, clean, and free of contaminants. For specific substrates like plywood or existing tiles, confirm compatibility and use appropriate primers from the Puma system.

Absolutely. Lapiz Blue technical team provides comprehensive support including product selection based on project requirements, coverage calculations, mixing and application guidance, and troubleshooting for any installation challenges. Contact us for specific recommendations for your flooring project.