weberbloc Fix repair mortar pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 50 kg.

Weber (Saint-Gobain) Repair MortarNo. 01 / 3

weberbloc Fix Technical Data Sheet (TDS)

Masonry mortars

weberbloc fix is a ready mix mortar that requires only the addition of water. It is made of cement, graded sand and additives for improved workability, better bonding and water retention.

  • Laying blockwork and masonry
Data sheet0.3 MB

Build a list across products and send it once, or ask about weberbloc Fix on WhatsApp now.

Class
Class A1 (fire resistance, BS EN 998-2:2003)
Pack we stock
50 kg

About weberbloc Fix

weberbloc fix is particularly adapted for mounting regular/ hollow blocks, stones, and bricks and to fill gaps between concrete and bricks. Weber states it as Class A1 (fire resistance, BS EN 998-2:2003). It is supplied in the UAE in 50kg. The mixing ratio is 5 to 6 liters of clean cool water per 50kg bag. Lapiz Blue supplies weberbloc Fix across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 02.21 · 0.3 MB · PDF

    weberbloc Fix as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

Weber publishes a yield rather than a rate per square metre: 1000kg of weberbloc fix with 12% of clean cool water will give around 550 liters of workable mortar; a 50kg bag = 27 liters approx. of fresh mortar (YIELD)

There is no area calculator for weberbloc Fix because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Laying blockwork and masonry

Specification

Technical data.

  • Class A1 (fire resistance, BS EN 998-2:2003)
  • EN 1504
weberbloc Fix technical specifications from the manufacturer TDS
ClassificationClass A1 (fire resistance, BS EN 998-2:2003)
Pack size50kg
Mixing ratio5 to 6 liters of clean cool water per 50kg bag
Storage and shelf life12 months
CompositionCement, graded sand, additives
AppearanceGrey powder
Mix density1.9kg/Lt±0.1
Grain sizeUp to 4mm
Thickness after laying the1 to 2cm
BlocRemove excess material with a wet sponge before setting.
Pull off strength at 28 days>0.3MPa
Compressive strength13MPa at 28 days
Astm c 109Protect the newly applied material from sunshine and wind.
Voc method usepa 24<1g/LT
Product typeMasonry mortars

Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberbloc Fix. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

50kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

5 to 6 liters of clean cool water per 50kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply weberbloc Fix, a repair mortar manufactured by Weber (Saint-Gobain), classified Class A1 (fire resistance, BS EN 998-2:2003). Masonry mortars. Mix at 5 to 6 liters of clean cool water per 50kg bag. Supplied in 50kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for weberbloc Fix
Productweberbloc Fix
ManufacturerWeber (Saint-Gobain)
TypeRepair Mortar
ClassificationClass A1 (fire resistance, BS EN 998-2:2003)
Pack size50kg
Mixing ratio5 to 6 liters of clean cool water per 50kg bag
Unit of measurementm2

Frequently Asked Questions

weberbloc Fix is classified Class A1 (fire resistance, BS EN 998-2:2003) according to EN 1504, as stated in the manufacturer's technical data sheet.

50kg

You can download the official weberbloc Fix technical data sheet as a PDF directly from this page, revision 02.21, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

weberbloc Fix in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberbloc Fix you need, or describe the job and we will work it out with you.

Chat on WhatsApp