
Weber masonry mortars, supplied across the UAE by Lapiz Blue
Site mixed mortar varies with whoever is holding the shovel. Weber makes the weberbloc range factory blended, so it needs only water and the mix is the same on every course. Lapiz Blue supplies it across the UAE, in the standard grade, a version with lime for workability, and a lightweight grade for lightweight and AAC blocks. Mortar is ordered by the volume of mortar a bag yields rather than by a rate per square metre, so tell us the wall area, the block size and the joint thickness and we will work the bag count back from that.
Visit Weber (Saint-Gobain) Official Website
The range. All 3.
Applications and Best-Fit Scenarios
Laying solid and hollow concrete blockwork
Laying lightweight and AAC blocks, using the lightweight grade
Stone and brick masonry
Filling the gap between concrete and blockwork
How to Choose the Right Mortar
Match the mortar to the block, since a lightweight or AAC block wants the lightweight grade rather than the standard one
Decide whether you want the lime version, which buys workability and a longer board life
Work out the joint thickness you are actually laying to, because it drives the quantity more than anything else
Remember the quantity comes from a yield in litres of mortar per bag, not from a rate per square metre
Only add the stated water, as a wetter mix is easier to lay and weaker once it sets
Common Mistakes to Avoid
- Using a standard mortar on lightweight or AAC blocks
- Estimating bags from wall area without allowing for the joint thickness
- Retempering mortar with more water after it has started to stiffen
- Laying in direct sun without protecting the work
What You Can Expect
Availability
Stock held on the lightweight grade, project order on the rest
Coverage
UAE wide supply with GCC export support
Branch Support
Quotations and site coordination from Dubai, Abu Dhabi and Sharjah
Technical Guidance
Help turning wall area, block size and joint thickness into a bag count
Documentation
Weber data sheets for submittals, on each product page
Frequently Asked Questions
Because Weber states how many litres of workable mortar a bag makes, not how many square metres it covers. How far that goes depends on your block size and joint thickness, which is why the quantity is worked out from those rather than from a fixed rate.
The lightweight grade. Using a standard mortar on a lightweight block puts a dense, strong joint against a weak unit, which is the wrong way round and tends to crack the block rather than the joint.
Workability and a longer time on the board before it stiffens, which matters on a hot day. It is a handling benefit rather than a strength one.
No. Retempering a mortar that has begun to set weakens it. Mix what the gang will lay in the stated pot life and no more.
Working out mortar quantities?
Send us the wall area, the block size and the joint thickness.
Share these details for a quick response:
- Wall area in square metres
- Block size and type
- Joint thickness you are laying to