Weber (Saint-Gobain) logo

Weber admixtures and bonding agents, supplied across the UAE by Lapiz Blue

These are the products that change how a site mixed mortar or concrete behaves: an SBR to improve adhesion and flexibility, a bonding agent to take new concrete onto old, a curing compound to hold water in a fresh slab through a Gulf afternoon. They are dosed as a percentage of the cement, not spread over an area, so there is no coverage figure to calculate from. Tell us the mix and what you are trying to fix and we will point you at the right one and the dose Weber states for it.

Visit Weber (Saint-Gobain) Official Website
Overlay in section: old concrete, bonding agent, new screed or mortar
Overlay in section: old concrete, bonding agent, new screed or mortar

New mortar does not bond to old concrete on its own. A bonding agent, SBR for screeds and renders or epoxy for structural overlays, is brushed on and the new material goes on while it is tacky.

The range. All 4.

Applications and Best-Fit Scenarios

1

Improving adhesion and flexibility in a site mixed mortar

2

Bonding new concrete and screed to existing concrete

3

Curing a fresh slab in high temperature and low humidity

4

Waterproofing admixtures for mortar and render

How to Choose the Right Admixture

1

Be clear what you are fixing first, since adhesion, flexibility, water resistance and curing are four different jobs

2

Note the dose, which Weber gives as a percentage of the cement weight and not as a quantity per square metre

3

Check whether the product changes the water you add, because several replace part of the mixing water

4

For bonding coats, confirm the open time, as a slurry that has skinned over will not bond

5

Check compatibility with the adhesive or mortar you are modifying, which the product page states

Common Mistakes to Avoid

  • Dosing by eye rather than by the stated percentage of cement
  • Adding the full mixing water as well as the admixture, so the mix is too wet
  • Letting a bonding slurry dry before the mortar goes on
  • Using a curing compound where a later finish needs to bond to that surface

What You Can Expect

Availability

Stock on the common grades, project order on the rest

Coverage

UAE wide supply with GCC export support

Branch Support

Quotations and site coordination from Dubai, Abu Dhabi and Sharjah

Technical Guidance

Help picking the product and reading the dose off the sheet

Documentation

Weber data sheets for submittals, on each product page

Frequently Asked Questions

Because these products are dosed against the cement in a mix, as a percentage by weight, rather than spread over an area. A calculator asking for square metres would give a meaningless answer, so each page shows the dose Weber states instead.

It improves adhesion, flexibility and resistance to abrasion and chemicals in a site mixed mortar or render, which is why it is the usual choice for a repair mortar or a bonding slurry.

Not quite. A curing compound leaves a film, so if something else has to bond to that surface afterwards, check the product page first. Some are designed to be removed or to break down, others are not.

Often yes, in part. The sheet states the dose and whether it counts against the water. Adding both in full makes the mix too wet and costs you strength.

Not sure which admixture you need?

Tell us the mix and what you are trying to improve.

Share these details for a quick response:

  • The mortar, render or concrete you are modifying
  • What you need it to do
  • Batch size, so we can work out the dose with you
Chat on WhatsApp