
Weber (Saint-Gobain) Repair MortarNo. 06 / 19
weberep 332 FR Technical Data Sheet (TDS)
Repair and anchoring
weberep 332 FR is a ready-to-use mortar composed of sand (reconstituted grain size range), special cement, microsilica, fibers, and additives that provide specific properties: non shrinking, thixotropic, high strength, high adhesion, and compactness. The highly compacted grains slows down carbonation.
- Concrete repair
- Anchoring and grouting
Build a list across products and send it once, or ask about weberep 332 FR on WhatsApp now.
- Consumption
- 2 kg/m² per mm
- Pack we stock
- 25 kg
- Thickness
- 2 to 20mm in one coat
About weberep 332 FR
This mortar may be applied to all sound substrates: concrete, masonry, rock and similar materials. Remove damaged concrete and laitance by jack-hammering, cold-chiseling, or running a concrete plane to get a sound, rough surface. It is supplied in the UAE in 25kg. Pot life is given as must be used within one hour from mixing. The mixing ratio is 3.75 to 4.5 liters of clean water to a 25kg weberep 332 FR bag. Lapiz Blue supplies weberep 332 FR across the UAE from Dubai, Abu Dhabi and Sharjah.
Documentation
Related documentation
Technical data sheet
Revision 10.24 · 0.2 MB · PDF
weberep 332 FR as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 20 mm.
As published in the data sheet
300kg
- 2 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 12 packs of 25 kg bag
Taken from the weberep 332 FR data sheet: Yield: Approx. 13 lit. mortar / 25kg bag; Consumption: Approximately 2 kg/m2 per mm thickness. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Concrete repair
- 02Anchoring and grouting
Specification
Technical data.
- EN 1504
| Pack size | 25kg |
|---|---|
| Pot life | must be used within one hour from mixing |
| Mixing ratio | 3.75 to 4.5 liters of clean water to a 25kg weberep 332 FR bag |
| Appearance | Grey powder |
| Grain size | 0 to 1.5mm |
| Yield | Approx. 13 lit. mortar / 25kg |
| Mortar density | 2.05 - 2.25 |
| Ph | 12 |
| Thickness | 2 to 20mm in one coat |
| Flexural strength | 8 MPa at 28 days |
| Compressive strength | 50 MPa at 28 days |
| Licable standards | that this Data Sheet version is the latest one. The company may |
| M c942 | modify it without prior notice. Technical characteristics are |
| M d4541 | listed for guidance only. For more information, please contact |
| Oneycombing and | *Properties listed above are only based on controlled laboratory |
| Product type | Repair and anchoring |
Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberep 332 FR. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
3.75 to 4.5 liters of clean water to a 25kg weberep 332 FR bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
must be used within one hour from mixing. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
For quantity surveyors
BOQ clause.
Supply and apply weberep 332 FR, a repair mortar manufactured by Weber (Saint-Gobain). Repair and anchoring. Allow 2 kg/m2 per mm, as published by the manufacturer. Applied thickness 2 to 20mm in one coat. Mix at 3.75 to 4.5 liters of clean water to a 25kg weberep 332 FR bag. Supplied in 25kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | weberep 332 FR |
|---|---|
| Manufacturer | Weber (Saint-Gobain) |
| Type | Repair Mortar |
| Consumption | 2 kg/m2 per mm |
| Thickness | 2 to 20mm in one coat |
| Pack size | 25kg |
| Mixing ratio | 3.75 to 4.5 liters of clean water to a 25kg weberep 332 FR bag |
| Pot life | must be used within one hour from mixing |
| Unit of measurement | m2 |
Frequently Asked Questions
25kg
You can download the official weberep 332 FR technical data sheet as a PDF directly from this page, revision 10.24, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

weber ANC 405 BFX
View TDS and specifications

weber ANC 405 BFX Gun
View TDS and specifications

weberep 314 RD
View TDS and specifications

weberep 331 HCS
View TDS and specifications

weberep 331 TX
View TDS and specifications

weberep 345 NSM
View TDS and specifications
All Repair and AnchoringEvery Weber product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
weberep 332 FR in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberep 332 FR you need, or describe the job and we will work it out with you.