
Weber (Saint-Gobain) SealantNo. 04 / 4
weber Seal PS 1000 PG Technical Data Sheet (TDS)
Waterproofing
weber seal PS 1000 GG/PG is a two part polysulphide high grade sealant rubber like, with an outstanding resistance to deterioration due to weathering, ozone, ultra-violet exposure and chemical attack.It has the ability to withstand repeated cycles of compression and expansion over a wide temperature range, and has excellent adhesion properties to all materials commonly used in building and construction work. It has an excellent stain resistance and is non-toxic once cured.
- Sealing movement and expansion joints
Build a list across products and send it once, or ask about weber Seal PS 1000 PG on WhatsApp now.
- Class
- ASTM C-920, Type M, grade P, class 25, use T2
- Pack we stock
- 4 l
About weber Seal PS 1000 PG
It is ideal for uses in expansion joints in reinforced concrete APPL structures such as bridges, reservoirs, water treatment works,; sea walls, roads and subways...etc. Weber states it as ASTM C-920, Type M, grade P, class 25, use T2. Lapiz Blue supplies weber Seal PS 1000 PG across the UAE from Dubai, Abu Dhabi and Sharjah.
Documentation
Related documentation
Technical data sheet
Revision 04.26 · 0.3 MB · PDF
weber Seal PS 1000 PG as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
Weber quotes this per metre of joint rather than per square metre: weberseal prime PS2 - approx. 100m run at 15mm deep per 250ml.; weber seal PS 1000 GG/PG two part polysulphide - length of joint, in metres, filled per 1 litre of material.
There is no area calculator for weber Seal PS 1000 PG because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01Sealing movement and expansion joints
Specification
Technical data.
- ASTM C-920, Type M, grade P, class 25, use T2
- ISO 11600
| Classification | ASTM C-920, Type M, grade P, class 25, use T2 |
|---|---|
| Pack size | 4L & 18L |
| Pot life | 2 hours at 25°C |
| Storage and shelf life | approximately 12 months |
| Service temperature | -20°C to +90°C |
| Appearance | Thixotropic paste, rubber like |
| Color | Grey, other colors upon re- |
| Solid content | 100 |
| Specific gravity | 1.55-1.65 |
| Full cure time | 7 days at 25°C |
| Tack free | within 24 hours at 25°C |
| Hardness shore a | GG : T1 |
| Tructions for use | the ambient temperature is between 5°C (40°F) and 50°C |
| Nt size | (122°F). |
| Nts preparation | through the mass of the material. The sides and base of |
| Surface | TREATMENTS |
| Metals | Remove any corrosion or mill scale |
| Wood bare | Wood surfaces must be clean and |
| Glass and glazed | Thoroughly clean the surfaces with |
| Materials | clean cloths soaked in oil-free |
| Coated surfaces | Where feasible, coatings should be |
| For sealing horizontal | Hardness shore A |
| Res are subject to high rapid | PG : T2 |
| E specification is highly | Movement |
| Joints in reinforced concrete | APPLICABLE STANDARD |
| Voirs water treatment works | • |
| Tc | conforms to BS4254:1983. |
| Um of 5mm to a | • |
| E 25 maf related to the | MIXING weber seal PS 1000 GG/PG |
| Not exceed joint width | Mix and use one complete unit at a time - do not part mix |
| Her impervious surfaces | separate tins with the curing agent contained in a smaller |
| Eatments | the container should be periodically scraped down with a |
| Rfaces must be clean and dry | blended with the base compound. |
| Product type | Waterproofing |
Typical values as Weber (Saint-Gobain) prints them in the data sheet for weber Seal PS 1000 PG. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
4L & 18L. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
2 hours at 25°C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
approximately 12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply weber Seal PS 1000 PG, a sealant manufactured by Weber (Saint-Gobain), classified ASTM C-920, Type M, grade P, class 25, use T2. Waterproofing. Supplied in 4l & 18l. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | weber Seal PS 1000 PG |
|---|---|
| Manufacturer | Weber (Saint-Gobain) |
| Type | Sealant |
| Classification | ASTM C-920, Type M, grade P, class 25, use T2 |
| Pack size | 4L & 18L |
| Pot life | 2 hours at 25°C |
| Unit of measurement | m2 |
Frequently Asked Questions
weber Seal PS 1000 PG is classified ASTM C-920, Type M, grade P, class 25, use T2 according to ISO 11600, as stated in the manufacturer's technical data sheet.
4L & 18L
You can download the official weber Seal PS 1000 PG technical data sheet as a PDF directly from this page, revision 04.26, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
weber Seal PS 1000 PG in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weber Seal PS 1000 PG you need, or describe the job and we will work it out with you.



