weberfloor EPO Coat RAL 7040 self levelling pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 18 l.

Weber (Saint-Gobain) Self LevellingNo. 10 / 13

weberfloor EPO Coat RAL 7040 Technical Data Sheet (TDS)

Flooring

weberfloor epocoat is a two-component, very low VOC, pigmented solvent-free epoxy floor coating with excellent leveling and a durable seamless surface. It is consisting of pre-weighed colored resin and hardener components.

  • Levelling floors before a finish
  • Industrial and commercial floors
Data sheet0.3 MB

Build a list across products and send it once, or ask about weberfloor EPO Coat RAL 7040 on WhatsApp now.

Consumption
0.2 to 1 kg/m²
Pack we stock
18 l

About weberfloor EPO Coat RAL 7040

Once treated with sand, weberfloor epocoat provides a hard wearing and abrasion resistant floor finish. weberfloor epocoat could be applied as coating or as anti-skid. For anti-skid system application, it is advisable to use Weber silica sand, weberfloor Sil S (0.3mm>1mm) at the rate of 0.5 to 1kg per m2 approx. weberfloor epocoat is specially designed for a wide range of heavy duty use, with various levels of mechanical and chemical exposure. It is supplied in the UAE in 18lit. Pot life is given as ≈55min @25°C. Lapiz Blue supplies weberfloor EPO Coat RAL 7040 across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 05.26 · 0.3 MB · PDF

    weberfloor EPO Coat RAL 7040 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

25.0 to 50.0kg

  • As the sheet states: 0.5 to 1 kg/m2
  • over 50 m2
Send this quantity for a quote

Taken from the weberfloor EPO Coat RAL 7040 data sheet: Approx. 5 m² per liter at 200 microns DFT per coat (18 lit pack), from CONSUMPTION AND COVERAGE heading; for anti-skid use, weberfloor Sil S silica sand is added separately at 0.5 to 1 kg/m² approx (sand additive, not epocoat itself). No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Levelling floors before a finish
  2. 02Industrial and commercial floors

Specification

Technical data.

  • EN 13813
weberfloor EPO Coat RAL 7040 technical specifications from the manufacturer TDS
Pack size18lit
Pot life≈55min @25°C
Storage and shelf lifeOne year
Form humidityLiquid
Mpressive strengthreduce adhesion. New concrete should be at least 28 days old,
Exural strengthRemove all weak, loose, smooth or broken pieces of concrete,
Rasion resistanceprimarily by blasting or grinding. The prepared surface must
Tm d4060 wheel cs 1765mg/1000 cycles
Ad of 1000g per wheelthan 1MPa. Moreover, it should have a CSP (concrete surface
Ll off load achieved ofprofile) of 3 to 5. Thereafter substrate must be crack free,
Acture3.5Mpa
Stm d 4541 17 ore d hardnessthe appropriate epoxy-based material according to the crack
Ngal resistancescattered with sand, to increase the bonding and create a
Stm g21strong mechanical key (For more details, please refer to the
Nsile strengthabove-mentioned products data sheets).
Tm d412 16 2021 ongationOnce the substrate is well prepared, it must be dust free,
Product typeFlooring

Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberfloor EPO Coat RAL 7040. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

18lit. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

≈55min @25°C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

One year in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply weberfloor EPO Coat RAL 7040, a self levelling manufactured by Weber (Saint-Gobain). Flooring. Allow 0.2 to 1 kg/m2, as published by the manufacturer. Supplied in 18lit. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for weberfloor EPO Coat RAL 7040
Productweberfloor EPO Coat RAL 7040
ManufacturerWeber (Saint-Gobain)
TypeSelf Levelling
Consumption0.2 to 1 kg/m2
Pack size18lit
Pot life≈55min @25°C
Unit of measurementm2

Frequently Asked Questions

18lit

You can download the official weberfloor EPO Coat RAL 7040 technical data sheet as a PDF directly from this page, revision 05.26, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

weberfloor EPO Coat RAL 7040 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberfloor EPO Coat RAL 7040 you need, or describe the job and we will work it out with you.

Chat on WhatsApp