weberfloor EPO Prime self levelling pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 9.6 kg.

Weber (Saint-Gobain) Self LevellingNo. 11 / 13

weberfloor EPO Prime Technical Data Sheet (TDS)

Flooring

weberfloor epo prime is a high quality two-component epoxy primer, having outstanding features as it was designed for priming nonporous, non-absorbent or dense substrate, such as tile and stone, using sand broadcast method prior to applying Weber self-leveling compound or absorbent and dense cementitious substrates, such as cement screed. This product is very easy to apply, provides excellent bonding with the substrate, furthermore, it has a low viscosity and an excellent wetting ability.

  • Levelling floors before a finish
  • Industrial and commercial floors
Data sheet0.3 MB

Build a list across products and send it once, or ask about weberfloor EPO Prime on WhatsApp now.

Consumption
0.15 kg/m²
Pack we stock
9.6 kg

About weberfloor EPO Prime

weberfloor epo prime is used as a primer to improve the adhesion over smooth, non-absorbent and difficult substrates such as metal, ceramic tiles, vinyl composition tiles, cement or epoxy based Terrazo. Lapiz Blue supplies weberfloor EPO Prime across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 01.19-A · 0.3 MB · PDF

    weberfloor EPO Prime as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

7.50kg

  • As the sheet states: 0.15 kg/m2
  • over 50 m2

Order 1 pack of 9.6 kg bag

Send this quantity for a quote

Taken from the weberfloor EPO Prime data sheet: 0.15 kg/m² the consumption might increase, depending on the substrate porosity. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Levelling floors before a finish
  2. 02Industrial and commercial floors

Specification

Technical data.

  • EN 13813
weberfloor EPO Prime technical specifications from the manufacturer TDS
Coverage0.15 kg/m² the consumption might increase, depending on the substrate porosity.
Pack sizePart A: 9.6 kg; Part B: 2.4 kg
Pot life3 h @ 23 °C (higher temperatures shorten the pot life)
Mixing ratioPart A:100 Part B: 17
ConsistencyLiquid
Storage and shelf life12 months
ColourTransparent
ChemistrySolvent free epoxy
Density1.08
Percent solids100% by volume
Adhesion to tile1.2 MPA
VocVery low
Set to light foot trafficAfter 24 h depending on
Waiting time before applying24 h depending on the
The smoothing compoundTemperature
Viscositypart B: 15s on ford cup 4
Berfloor epo primeFLOORING
Tructions for useCLEANING
Erial to avoid entrapping aircontact with the skin, it should be promptly removed before
Sonto the latest version of the safety data sheet.
Duct applicationDISCLAIMER
Strateare beyond its control. It is recommended to verify with the
Product typeFlooring

Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberfloor EPO Prime. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

Part A: 9.6 kg; Part B: 2.4 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

Part A:100 Part B: 17. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

3 h @ 23 °C (higher temperatures shorten the pot life). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply weberfloor EPO Prime, a self levelling manufactured by Weber (Saint-Gobain). Flooring. Allow 0.15 kg/m2, as published by the manufacturer. Mix at Part A:100 Part B: 17. Supplied in part a: 9.6 kg; part b: 2.4 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for weberfloor EPO Prime
Productweberfloor EPO Prime
ManufacturerWeber (Saint-Gobain)
TypeSelf Levelling
Consumption0.15 kg/m2
Pack sizePart A: 9.6 kg; Part B: 2.4 kg
Mixing ratioPart A:100 Part B: 17
Pot life3 h @ 23 °C (higher temperatures shorten the pot life)
Unit of measurementm2

Frequently Asked Questions

As per the TDS: 0.15 kg/m² the consumption might increase, depending on the substrate porosity.

Part A: 9.6 kg; Part B: 2.4 kg

You can download the official weberfloor EPO Prime technical data sheet as a PDF directly from this page, revision 01.19-A, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

weberfloor EPO Prime in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberfloor EPO Prime you need, or describe the job and we will work it out with you.

Chat on WhatsApp