Large Format Handling and Electric Cutting Systems

SuperLift uses four 200mm diameter vacuum cups that create strong suction across the tile surface. The cups connect to a rigid frame that distributes weight evenly, preventing stress concentration. Vacuum gauges on each cup show suction status in real time, letting you verify grip before lifting. The wheeled base allows transport without repeatedly releasing and reattaching suction.

The standard SuperLift uses manual pump-action to create vacuum. SuperLift E-Power adds an electronic pump that automatically maintains vacuum pressure - if suction drops due to surface irregularities or minor leaks, the system reactivates to restore grip. This electronic monitoring provides additional safety margin during extended handling operations.

Yes, with the appropriate blade selection. The 2.2kW motor provides sufficient power for marble, granite, and other natural stones. Choose softer bond diamond blades for harder stones like granite, and harder bond blades for softer stones like marble. The wet cutting system keeps material cool and suppresses dust regardless of material type.

Flash Line uses modular aluminum rails that lock together to create a scoring guide across any length. The patented Squeeze system clamps the tile securely, while a wheeled scoring head runs along the rail to create a consistent incision. For slabs up to 360cm, Flash Line 3 uses three 120cm bars. After scoring, the built-in breaking system snaps the tile cleanly along the line.

Keep the water reservoir clean and filled during operation - dirty water contains abrasive particles that accelerate blade wear. Check blade condition regularly for worn segments or damage. Clean the table surface after each session to prevent material buildup that could affect cut accuracy. Inspect electrical connections and cord condition periodically for safety.

Matching the blade to the saw ensures optimal performance from first use. DNA blades are engineered for the RPM and power output of Montolit saws, meaning proper cutting speed and heat dissipation. Using mismatched blades can result in slow cutting, premature wear, or poor edge quality - problems that waste time and material on expensive large format projects.

The SuperLift E-Power version enables solo handling for tiles within its weight capacity. The electronic vacuum monitoring maintains grip without requiring a second person to watch gauges. However, for the largest and heaviest slabs, two-person handling remains safer and more practical - SuperLift works well with a person at each end of the frame.

F1 Brooklyn is available in four sizes based on cutting length requirements. Measure the largest tiles you regularly work with and select a saw that accommodates diagonal cuts across that dimension. For occasional oversized pieces, the Flash Line system provides an alternative to purchasing a larger saw. Lapiz Blue can help match equipment to your project profile.

Aquaflex is a dust elimination solution designed for use with angle grinders. It attaches to your grinder and captures dust at the source during cutting operations, maintaining air quality on indoor job sites and reducing cleanup requirements. Essential for projects where dust control is mandated or where workers need respiratory protection from airborne particles.

The F2 is a small portable tile saw designed for ceramic materials and smaller jobs where portability matters. Choose F2 when working in tight spaces, doing repair work, or handling light-duty ceramic cutting. For thick porcelain, large format tiles, or high-volume production cutting, the F1 Brooklyn provides the motor power and capacity needed for professional results.