
Kerakoll Repair MortarNo. 01 / 3
Geolite Technical Data Sheet (TDS)
Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete
Geolite is a mineral geo-mortar with a geo-binder base, formulated for the monolithic repair of reinforced concrete and declared under EN 1504-3. The binder is the distinction worth understanding.
- Monolithic repair of reinforced concrete
- Vertical faces and soffits where a mortar must not slump
- Structural repair work specified to EN 1504-3
- Reinstating cover concrete over treated reinforcement
Build a list across products and send it once, or ask about Geolite on WhatsApp now.
- Class
- EN 1504-3
- Consumption
- 1.7 kg/m² per mm
- Pack we stock
- 25 kg
- Thickness
- 2 to 40 mm
About Geolite
This is not a lime plaster and not an ordinary cement patching mortar, but a technological mortar meant to become one body with the concrete it repairs, so that patch and parent section behave alike under load and temperature. The thixotropic consistency lets it be applied to vertical faces and soffits without slumping, and normal setting at eighty minutes gives a working window rather than a rush. Supplied in 25 kg bags. On a Gulf structure, where chloride laden moisture drives reinforcement corrosion, preparation matters as much as the mortar: cut back to sound concrete and treat the exposed steel before patching.
Documentation
Related documentation
Technical data sheet
0.5 MB · PDF
Geolite as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 2 to 40 mm.
As published in the data sheet
1,700kg
- 1.7 kg/m2 per mm
- 20 mm thick
- over 50 m2
Order 68 packs of 25 kg bag
Taken from the Geolite data sheet: COVERAGE: approximately 17 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet quotes per centimetre and the rate here is that divided by ten. Minimum thickness 2 mm, maximum thickness per layer 40 mm.
Application
Where it is used.
- 01Monolithic repair of reinforced concrete
- 02Vertical faces and soffits where a mortar must not slump
- 03Structural repair work specified to EN 1504-3
- 04Reinstating cover concrete over treated reinforcement
Specification
Technical data.
- EN 1504-3
- EN 1504
| Classification | EN 1504-3 |
|---|---|
| Coverage | ≈ 17 kg/m² per cm of thickness |
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 5.1 l / 1 x 25 kg bag |
| Application temperature | +5 deg C to +40 deg C |
| Consistency | powder |
| Storage and shelf life | 12 months |
| Product type | Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete |
| Thickness | 2 to 40 mm |
Typical values as Kerakoll prints them in the data sheet for Geolite. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
≈ 5.1 l / 1 x 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Geolite, a repair mortar manufactured by Kerakoll, classified EN 1504-3. Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Allow 1.7 kg/m2 per mm, as published by the manufacturer. Applied thickness 2 to 40 mm. Mix at ≈ 5.1 l / 1 x 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Geolite |
|---|---|
| Manufacturer | Kerakoll |
| Type | Repair Mortar |
| Classification | EN 1504-3 |
| Consumption | 1.7 kg/m2 per mm |
| Thickness | 2 to 40 mm |
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 5.1 l / 1 x 25 kg bag |
| Unit of measurement | m2 |
Frequently Asked Questions
Geolite is classified EN 1504-3 according to EN 1504, as stated in the manufacturer's technical data sheet.
As per the TDS: ≈ 17 kg/m² per cm of thickness
25 kg bags
You can download the official Geolite technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Geolite in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Geolite you need, or describe the job and we will work it out with you.

