
Kerakoll Repair MortarNo. 02 / 3
Geolite Magma Technical Data Sheet (TDS)
Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete
Pourable rather than trowelled, Geolite Magma is a mineral geo-mortar with a geo-binder base for the monolithic repair of reinforced concrete, declared under EN 1504-7, the part of the standard covering protection of reinforcement against corrosion. Being multipurpose and pourable, it is the grade for repairs that have to be placed into formwork or into a deep section where a thixotropic mortar cannot be worked in, such as a column head or a beam cut back to the steel.
- Pourable monolithic repair of reinforced concrete
- Deep sections and formed repairs such as column heads
- Repairs where reinforcement needs corrosion protection to EN 1504-7
- Multipurpose structural repair on concrete frames
Build a list across products and send it once, or ask about Geolite Magma on WhatsApp now.
- Class
- EN 1504-7
- Consumption
- 1.9 kg/m² per mm
- Pack we stock
- 25 kg
- Thickness
- 10 to 100 mm
About Geolite Magma
Normal setting is sixty minutes and pot life forty five minutes, so formwork, mortar and gang all have to be ready before mixing starts. Supplied in 25 kg bags. In UAE summer temperatures that pot life shortens, which makes an early morning or night pour the sensible choice.
Documentation
Related documentation
Technical data sheet
0.5 MB · PDF
Geolite Magma as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 10 to 100 mm.
As published in the data sheet
1,900kg
- 1.9 kg/m2 per mm
- 20 mm thick
- over 50 m2
Order 76 packs of 25 kg bag
Taken from the Geolite Magma data sheet: COVERAGE: approximately 19 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet quotes per centimetre and the rate here is that divided by ten. Minimum thickness 10 mm, maximum 60 to 100 mm according to the type of work. For thicker layers the sheet mixes in Ghiaia 3.6 gravel, which changes the rate.
Application
Where it is used.
- 01Pourable monolithic repair of reinforced concrete
- 02Deep sections and formed repairs such as column heads
- 03Repairs where reinforcement needs corrosion protection to EN 1504-7
- 04Multipurpose structural repair on concrete frames
Specification
Technical data.
- EN 1504-7
- EN 1504
| Classification | EN 1504-7 |
|---|---|
| Coverage | ≈ 19 kg/m² per cm of thickness |
| Pack size | 25 kg bags |
| Pot life | 70 min |
| Mixing ratio | ≈ 3.8 l / 1 x 25 kg bag |
| Application temperature | +5 deg C to +40 deg C |
| Consistency | powder |
| Storage and shelf life | 12 months |
| Product type | Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete |
| Thickness | 10 to 100 mm |
Typical values as Kerakoll prints them in the data sheet for Geolite Magma. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
≈ 3.8 l / 1 x 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
70 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Geolite Magma, a repair mortar manufactured by Kerakoll, classified EN 1504-7. Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Allow 1.9 kg/m2 per mm, as published by the manufacturer. Applied thickness 10 to 100 mm. Mix at ≈ 3.8 l / 1 x 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Geolite Magma |
|---|---|
| Manufacturer | Kerakoll |
| Type | Repair Mortar |
| Classification | EN 1504-7 |
| Consumption | 1.9 kg/m2 per mm |
| Thickness | 10 to 100 mm |
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 3.8 l / 1 x 25 kg bag |
| Pot life | 70 min |
| Unit of measurement | m2 |
Frequently Asked Questions
Geolite Magma is classified EN 1504-7 according to EN 1504, as stated in the manufacturer's technical data sheet.
As per the TDS: ≈ 19 kg/m² per cm of thickness
25 kg bags
You can download the official Geolite Magma technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Geolite Magma in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Geolite Magma you need, or describe the job and we will work it out with you.

