
Kerakoll Repair MortarNo. 03 / 3
Metric Track Technical Data Sheet (TDS)
Rapid-setting, fibre-reinforced semi-thixotropic mortar for road, industrial and urban maintenance work
Metric Track is a rapid setting, fibre reinforced, semi thixotropic mortar for road, industrial and urban maintenance work, declared under EN 1504-3. Rapid setting is the whole point of it.
- Road and carriageway patch repairs
- Industrial floor and loading bay maintenance
- Urban maintenance work needing a fast return to service
- Horizontal patches and bay edges in one mortar
- Repairs specified to EN 1504-3
Build a list across products and send it once, or ask about Metric Track on WhatsApp now.
- Class
- EN 1504-3
- Consumption
- 1.9 kg/m² per mm
- Pack we stock
- 25 kg
- Thickness
- 10 to 100 mm
About Metric Track
The repairs it is made for sit under traffic, and the real cost of the work is measured in how long the road, the yard or the loading bay stays closed rather than in the price of the bag. Fibre reinforcement controls the shrinkage cracking that a fast mortar is otherwise prone to, and the semi thixotropic consistency handles both horizontal patches and the vertical edge of a bay. Pot life is fifty minutes and shelf life six months, shorter than the rest of the range, so order it to the job. Supplied in 25 kg bags.
Documentation
Related documentation
Technical data sheet
0.4 MB · PDF
Metric Track as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 10 to 100 mm.
As published in the data sheet
1,900kg
- 1.9 kg/m2 per mm
- 20 mm thick
- over 50 m2
Order 76 packs of 25 kg bag
Taken from the Metric Track data sheet: COVERAGE: approximately 19 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet quotes per centimetre and the rate here is that divided by ten. Minimum thickness 10 mm, maximum 60 to 100 mm according to the type of work. For thicker layers the sheet mixes in Ghiaia 3.6 gravel, which changes the rate.
Application
Where it is used.
- 01Road and carriageway patch repairs
- 02Industrial floor and loading bay maintenance
- 03Urban maintenance work needing a fast return to service
- 04Horizontal patches and bay edges in one mortar
- 05Repairs specified to EN 1504-3
Specification
Technical data.
- EN 1504-3
- EN 1504
| Classification | EN 1504-3 |
|---|---|
| Coverage | ≈ 19 kg/m² per cm of thickness |
| Pack size | 25 kg bags |
| Pot life | 50 min |
| Mixing ratio | Metric Track grey ≈ 3.8 l / 1 x 25 kg bag |
| Application temperature | +5 deg C to +35 deg C |
| Consistency | Powder |
| Storage and shelf life | 6 months |
| Product type | Rapid-setting, fibre-reinforced semi-thixotropic mortar for road, industrial and urban maintenance work |
| Thickness | 10 to 100 mm |
Typical values as Kerakoll prints them in the data sheet for Metric Track. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
Metric Track grey ≈ 3.8 l / 1 x 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
50 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
6 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Metric Track, a repair mortar manufactured by Kerakoll, classified EN 1504-3. Rapid-setting, fibre-reinforced semi-thixotropic mortar for road, industrial and urban maintenance work. Allow 1.9 kg/m2 per mm, as published by the manufacturer. Applied thickness 10 to 100 mm. Mix at Metric Track grey ≈ 3.8 l / 1 x 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Metric Track |
|---|---|
| Manufacturer | Kerakoll |
| Type | Repair Mortar |
| Classification | EN 1504-3 |
| Consumption | 1.9 kg/m2 per mm |
| Thickness | 10 to 100 mm |
| Pack size | 25 kg bags |
| Mixing ratio | Metric Track grey ≈ 3.8 l / 1 x 25 kg bag |
| Pot life | 50 min |
| Unit of measurement | m2 |
Frequently Asked Questions
Metric Track is classified EN 1504-3 according to EN 1504, as stated in the manufacturer's technical data sheet.
As per the TDS: ≈ 19 kg/m² per cm of thickness
25 kg bags
You can download the official Metric Track technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Metric Track in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Metric Track you need, or describe the job and we will work it out with you.

