Profilpas logo

Profilpas tools and accessories, supplied across the UAE by Lapiz Blue

Alongside the profiles, Profilpas makes the equipment that goes with laying them: spacers that set the joint, suction lifters for handling large format slabs, magnetic alignment kits, and the bending machine that forms its own Flex profiles to a radius. Lapiz Blue supplies these across the UAE. They are ordered against a job rather than held in depth, so the practical route is to tell us the slab size, the joint width and whether any profile has to be curved, and we will confirm what is needed and the lead time.

Visit Profilpas Official Website
Profilpas tile levelling clips, spacers and a vacuum lifter on a large format porcelain slab
Tools and Accessories - Image 2

The range. All 8.

Applications and Best-Fit Scenarios

1

Setting and holding a consistent joint width while tiling

2

Handling large format porcelain slabs safely on site

3

Forming Profilpas Flex profiles to a curve

4

Aligning profiles and trims during installation

What You Can Expect

Availability

Mostly project order, with common spacers held in branch

Coverage

UAE wide supply with GCC export support

Branch Support

Quotations and site coordination from Dubai, Abu Dhabi and Sharjah

Technical Guidance

Help matching the tool to the slab size and the profile being formed

Frequently Asked Questions

The common sizes yes. Less usual sizes and the handling equipment are ordered against the job, so give us a little lead time on those.

The Flex profiles can, using the Proflex bending machine, which takes a kit for each profile. Agree the radius first, because it decides which kit is needed.

Not every one. Profilpas publishes English sheets for most of the range but not for all of the equipment, and where there is none the product page says so rather than showing a sheet for something else.

Need the tools to go with the profiles?

Tell us the slab size, the joint width and any curve you have to form.

Share these details for a quick response:

  • Slab or tile size being handled
  • Joint width you are setting
  • Any profile that has to be curved, with the radius
Chat on WhatsApp