
Weber (Saint-Gobain) Repair MortarNo. 09 / 19
weberep 360 FFR Technical Data Sheet (TDS)
Admixtures
weberep 360 FFR is a dry pre-mixed polymer-modified cementitious coating based on hydraulic binders, siliceous filler, water retaining agents and other admixtures. weberep 360 FFR is available in white and light-grey.
- Concrete repair
- Anchoring and grouting
Build a list across products and send it once, or ask about weberep 360 FFR on WhatsApp now.
- Consumption
- 1.3 kg/m² per mm
- Pack we stock
- 20 kg
About weberep 360 FFR
weberep 360 FFR is used as a render in one or two coats, on walls and ceilings in internal and external conditions. weberep 360 FFR can be used to fill superficial cracks in concrete and plasters. Concrete and masonry surfaces. The sheet gives consumption as 1.3 kg/m² per 1 mm thickness. The mixing ratio is 5.4 to 7 litres of clean cool water per 20 kg bag (6.4 L in KSA & 6 L in Kuwait). Shelf life is 12 months in the unopened pack. Lapiz Blue supplies weberep 360 FFR across the UAE from Dubai, Abu Dhabi and Sharjah.
Documentation
Related documentation
Technical data sheet
Revision 07.16-A · 0.1 MB · PDF
weberep 360 FFR as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 20 mm.
As published in the data sheet
195kg
- 1.3 kg/m2 per mm
- 3 mm thick
- over 50 m2
Taken from the weberep 360 FFR data sheet: 1.3 kg/m² per 1 mm thickness (CONSUMPTION); approximately 15 L per 20 kg bag (Yield). No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Concrete repair
- 02Anchoring and grouting
Specification
Technical data.
- EN 1504
| Coverage | 1.3 kg/m² per 1 mm thickness (CONSUMPTION); approximately 15 L per 20 kg bag (Yield) |
|---|---|
| Pack size | 20 kg |
| Mixing ratio | 5.4 to 7 litres of clean cool water per 20 kg bag (6.4 L in KSA & 6 L in Kuwait) |
| Storage and shelf life | 12 months |
| Appearance | Cement based powder |
| Grain size | 0 to 0.1 mm |
| Pull off test astm d 4541 | > 0.5 N/mm² |
| Flexural strength 28 days | 5 N/mm² |
| Bs en 196 1 | The substrate should be sound, clean free from any dust or |
| Compressive strength | > 20N/mm² |
| Curing | Air cured according to |
| Minimum thickness per coat | 1 mm |
| Maximum thickness per coat | 3 mm |
| Tensile strength astm c | The paste should be mixed vigorously until fully homogeneous. |
| Voc and formaldehyde | None (<10µg/l) |
| Product type | Admixtures |
Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberep 360 FFR. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
5.4 to 7 litres of clean cool water per 20 kg bag (6.4 L in KSA & 6 L in Kuwait). Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply weberep 360 FFR, a repair mortar manufactured by Weber (Saint-Gobain). Admixtures. Allow 1.3 kg/m2 per mm, as published by the manufacturer. Mix at 5.4 to 7 litres of clean cool water per 20 kg bag (6.4 L in KSA & 6 L in Kuwait). Supplied in 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | weberep 360 FFR |
|---|---|
| Manufacturer | Weber (Saint-Gobain) |
| Type | Repair Mortar |
| Consumption | 1.3 kg/m2 per mm |
| Pack size | 20 kg |
| Mixing ratio | 5.4 to 7 litres of clean cool water per 20 kg bag (6.4 L in KSA & 6 L in Kuwait) |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 1.3 kg/m² per 1 mm thickness (CONSUMPTION); approximately 15 L per 20 kg bag (Yield)
20 kg
You can download the official weberep 360 FFR technical data sheet as a PDF directly from this page, revision 07.16-A, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

weber ANC 405 BFX
View TDS and specifications

weber ANC 405 BFX Gun
View TDS and specifications

weberep 314 RD
View TDS and specifications

weberep 331 HCS
View TDS and specifications

weberep 331 TX
View TDS and specifications

weberep 332 FR
View TDS and specifications
All Repair and AnchoringEvery Weber product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
weberep 360 FFR in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberep 360 FFR you need, or describe the job and we will work it out with you.