
Weber (Saint-Gobain) Repair MortarNo. 11 / 19
weberep EPO 412 CRY Plus Technical Data Sheet (TDS)
Repair and anchoring
weberep epo 412 CRY plus is a two component, putty like consistency, moisture tolerant epoxy based used for patch repairs and bonding paste. Weberep epo 412 CRY plus is solvent free and shows no shrinkage.
- Concrete repair
- Anchoring and grouting
Build a list across products and send it once, or ask about weberep EPO 412 CRY Plus on WhatsApp now.
- Consumption
- 1.7 kg/m² per mm
- Pack we stock
- 1 kg
About weberep EPO 412 CRY Plus
It ensures a bonding that is waterproof and resistant to atmospheric corrosion in extreme climates. weberep epo 412 CRY Plus is designed for application to minor imperfections in concrete surfaces. General re-profiling over small areas, up to 3 mm. Sealing of concrete surface cracks. The sheet gives consumption as 1.7 kg/m² at 1 mm thick. It is supplied in the UAE in 1 kg; 6 kg. Pot life is given as > 60 min (at 25°C). Lapiz Blue supplies weberep EPO 412 CRY Plus across the UAE from Dubai, Abu Dhabi and Sharjah.
Documentation
Related documentation
Technical data sheet
Revision 12.17-A · 0.8 MB · PDF
weberep EPO 412 CRY Plus as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 20 mm.
As published in the data sheet
255kg
- 1.7 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 255 packs of 1 kg bag
Taken from the weberep EPO 412 CRY Plus data sheet: 1.7 kg/m² at 1 mm thick. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Concrete repair
- 02Anchoring and grouting
Specification
Technical data.
- EN 1504
| Coverage | 1.7 kg/m² at 1 mm thick |
|---|---|
| Pack size | 1 kg; 6 kg |
| Pot life | > 60 min (at 25°C) |
| Pot life at 25 c | > 60 min |
| Setting time at 25 c | 1 Day |
| Water absorption at | < 0.5 % |
| Astm d 579 | material to avoid entrapping air. Add Part B over Part A, mix |
| Astm c 882 | weberep epo 412 CRY Plus must be well mixed to ensure |
| Astm c 580 | Do not add solvent, water or thinner at any time during the |
| Weberep epo 412 cry plus | TECHNICAL AND |
| Roduct application | DISCLAIMER |
| S patching mortar | While the company guarantees its products against defective |
| S bonding paste | are listed for guidance only. For more information, please |
| Own with difficulty | sole property of SODAMCO Holding. The unauthorized |
| Berep epo 412 cry plus | TECHNICAL AND |
| Duct application | DISCLAIMER |
| Patching mortar | While the company guarantees its products against defective |
| Bonding paste | are listed for guidance only. For more information, please |
| Product type | Repair and anchoring |
Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberep EPO 412 CRY Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
1 kg; 6 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
> 60 min (at 25°C). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
For quantity surveyors
BOQ clause.
Supply and apply weberep EPO 412 CRY Plus, a repair mortar manufactured by Weber (Saint-Gobain). Repair and anchoring. Allow 1.7 kg/m2 per mm, as published by the manufacturer. Supplied in 1 kg; 6 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | weberep EPO 412 CRY Plus |
|---|---|
| Manufacturer | Weber (Saint-Gobain) |
| Type | Repair Mortar |
| Consumption | 1.7 kg/m2 per mm |
| Pack size | 1 kg; 6 kg |
| Pot life | > 60 min (at 25°C) |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 1.7 kg/m² at 1 mm thick
1 kg; 6 kg
You can download the official weberep EPO 412 CRY Plus technical data sheet as a PDF directly from this page, revision 12.17-A, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

weber ANC 405 BFX
View TDS and specifications

weber ANC 405 BFX Gun
View TDS and specifications

weberep 314 RD
View TDS and specifications

weberep 331 HCS
View TDS and specifications

weberep 331 TX
View TDS and specifications

weberep 332 FR
View TDS and specifications
All Repair and AnchoringEvery Weber product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
weberep EPO 412 CRY Plus in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberep EPO 412 CRY Plus you need, or describe the job and we will work it out with you.