
Weber (Saint-Gobain) WaterproofingNo. 02 / 19
weberdry 110 FX Technical Data Sheet (TDS)
Waterproofing
weberdry 110 FX is a two component polymer modified cementitious coating:; Powder made of cements, fillers and admixtures. Liquid based on resins and additives.
- Waterproofing wet areas and roofs
- Protecting concrete from water ingress
Build a list across products and send it once, or ask about weberdry 110 FX on WhatsApp now.
- Consumption
- 0.5 to 4 kg/m²
- Pack we stock
- 24.80 kg
About weberdry 110 FX
It is available in Grey and White. weberdry 110 FX cures to form an elastomeric, waterproof, flexible and resistant membrane, suitable for use in water tanks, reservoirs, canals and tunnels.The material which can be applied on cement based substrate like concrete, cement plaster, masonry and gypsum boards (with primer) substrates has been designed to accommodate good crack bridging qualities even after long term water immersion. weberdry 110 FX must be used on damp cement based substrates. The adhesion and sealing qualities of weberdry 110 FX are outstanding. The material prevents reinforcements from corrosion. Lapiz Blue supplies weberdry 110 FX across the UAE from Dubai, Abu Dhabi and Sharjah.
Documentation
Related documentation
Technical data sheet
Revision 12.25 · 0.3 MB · PDF
weberdry 110 FX as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
100 to 200kg
- Overall, depending on the substrate: 2 to 4 kg/m2
- over 50 m2
Taken from the weberdry 110 FX data sheet: 2kg/m2 to 4kg/m2 depending on the nature of the support (CONSUMPTION heading, overall); 1 to 2kg/m2 for 1mm wet film thickness for the base coat; 0.5 to 1kg/m2 each for the first and second layers. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Waterproofing wet areas and roofs
- 02Protecting concrete from water ingress
Where it is not the right product
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- EN 14891
| Pack size | 24.80 kg |
|---|---|
| Powder appearance | White or grey |
| Mixed density at 24 c | 1700±100kg/m3 |
| Water absorption | Reduction in water |
| Pull off strength astm d | 1.8±0.3MPa @28 days on well |
| Product type | Waterproofing |
Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberdry 110 FX. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
24.80 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
For quantity surveyors
BOQ clause.
Supply and apply weberdry 110 FX, a waterproofing manufactured by Weber (Saint-Gobain). Waterproofing. Allow 0.5 to 4 kg/m2, as published by the manufacturer. Supplied in 24.80 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | weberdry 110 FX |
|---|---|
| Manufacturer | Weber (Saint-Gobain) |
| Type | Waterproofing |
| Consumption | 0.5 to 4 kg/m2 |
| Pack size | 24.80 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
24.80 kg
You can download the official weberdry 110 FX technical data sheet as a PDF directly from this page, revision 12.25, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

weber Band
View TDS and specifications

weberdry 116 FX
View TDS and specifications

weberdry 130 PR
View TDS and specifications

weberdry 136 FX
View TDS and specifications

weberdry 150 BLC
View TDS and specifications

weberdry 360 PU
View TDS and specifications
All WaterproofingEvery Weber product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
weberdry 110 FX in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberdry 110 FX you need, or describe the job and we will work it out with you.