weberdry 130 PR waterproofing pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 32.5 kg.

Weber (Saint-Gobain) WaterproofingNo. 04 / 19

weberdry 130 PR Technical Data Sheet (TDS)

Waterproofing

weberdry 130 PR Grey / White is cement based waterproof coating for masonry and concrete, resistant to positive and negative water pressure. It is a 2-component product: A-Powder: ready mixture of cements, fillers and admixtures.

  • Waterproofing wet areas and roofs
  • Protecting concrete from water ingress
Data sheet0.1 MB

Build a list across products and send it once, or ask about weberdry 130 PR on WhatsApp now.

Consumption
0.5 to 3 kg/m²
Pack we stock
32.5 kg

About weberdry 130 PR

B- Mixing liquid based on resins and additives. The product is non toxic and can be in contact with drinking water. External coating on any construction:; Vertical; Underground; Immersed; Internal coating of constructions with negative pressures; Completely watertight departments; Immersed cellars; Lift holes; Car parks; Waterproofing of tunnels, galleries... It is supplied in the UAE in 32.5 kg. Pot life is given as More than 2 hrs. Shelf life is 6 months in the unopened pack. weberdry 130 PR sits in Weber's waterproofing range, made for the Gulf by Saint-Gobain through SODAMCO. Lapiz Blue supplies weberdry 130 PR across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 08.16-A · 0.1 MB · PDF

    weberdry 130 PR as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

100 to 150kg

  • As the sheet states: 2 to 3 kg/m2
  • over 50 m2

Order 4 to 5 packs of 32.5 kg bag

Send this quantity for a quote

Taken from the weberdry 130 PR data sheet: 1st layer: 1 kg/m2; 2nd and 3rd layers: 0.5 to 1 kg/m2 each; drinking water reservoirs example: 1 kg/m2 per layer, total consumption 2 kg/m2; watertight departments / tunnels under high negative pressure example: 2 to 3 kg/m2. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Waterproofing wet areas and roofs
  2. 02Protecting concrete from water ingress

Specification

Technical data.

  • EN 14891
weberdry 130 PR technical specifications from the manufacturer TDS
Pack size32.5 kg
Pot lifeMore than 2 hrs
Application temperature5 to 35 degree
Storage and shelf life6 months
ColorGrey / white
Full curing timeMinimum 7 days
Pot life lab conditionsMore than 2 hrs
Surface absorption bs 188110 seconds
Ml m2 sec60 seconds
Tensile strength n mm27 days
Astm c 30728 days
Pull off test n mm21.44
Astm d 4541fibreglass band between the first and second layer.
Crack bridging capacityNo sign of cracks, loss of
Weberdry 130 pr grey whiteWATERPROOFING
Xamples of applicationsdata sheet or any information it contains, is prohibited and
Rinking water reservoirs kg msubject to legal pursuit.
Berdry 130 pr grey whiteWATERPROOFING
Mples of applicationsdata sheet or any information it contains, is prohibited and
Product typeWaterproofing

Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberdry 130 PR. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

32.5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

More than 2 hrs. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

6 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply weberdry 130 PR, a waterproofing manufactured by Weber (Saint-Gobain). Waterproofing. Allow 0.5 to 3 kg/m2, as published by the manufacturer. Supplied in 32.5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for weberdry 130 PR
Productweberdry 130 PR
ManufacturerWeber (Saint-Gobain)
TypeWaterproofing
Consumption0.5 to 3 kg/m2
Pack size32.5 kg
Pot lifeMore than 2 hrs
Unit of measurementm2

Frequently Asked Questions

32.5 kg

You can download the official weberdry 130 PR technical data sheet as a PDF directly from this page, revision 08.16-A, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

weberdry 130 PR in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberdry 130 PR you need, or describe the job and we will work it out with you.

Chat on WhatsApp