
Weber (Saint-Gobain) WaterproofingNo. 03 / 19
weberdry 116 FX Technical Data Sheet (TDS)
Waterproofing
weberdry 116 FX is a cement based two component polymer modified waterproofing slurry, available in grey and white. It is applied to concrete and mortar structures to prevent water infiltration.
- Waterproofing wet areas and roofs
- Protecting concrete from water ingress
Build a list across products and send it once, or ask about weberdry 116 FX on WhatsApp now.
- Consumption
- 1.8 to 3 kg/m²
- Pack we stock
- 18 kg
About weberdry 116 FX
weberdry 116 FX Grey / White is used for external and internal waterproofing, crack sealing, repair work in the following structures:; Facades: As a damp-proof coating, followed by approved protective covering; Bathrooms commercial & residential; Roofs and foundations (weberdry 116 FX (white) can be used for roof waterproofing applications, followed by protective covering); Kitchens - Commercial & Residential; Steam rooms, showers; Laundry rooms; Swimming pools It is used as well, as a backing to marble, granite stones against water absorption. It is supplied in the UAE in 18 kg. Lapiz Blue supplies weberdry 116 FX across the UAE from Dubai, Abu Dhabi and Sharjah.
Documentation
Related documentation
Technical data sheet
Revision 01.20-A · 0.3 MB · PDF
weberdry 116 FX as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
100 to 150kg
- Overall, depending on surface and consistency: 2 to 3 kg/m2
- over 50 m2
Order 6 to 9 packs of 18 kg bag
Taken from the weberdry 116 FX data sheet: Approx. 2 to 3 kg/m² depending on the surface and consistency required; Approx 1.8 kg per m2 for 1 mm thickness DFT. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Waterproofing wet areas and roofs
- 02Protecting concrete from water ingress
Specification
Technical data.
- EN 14891
| Pack size | 18 kg |
|---|---|
| Mixing ratio | powder (A) 13.33 kg + 4.67 kg liquid (B) = 18 kg |
| Storage and shelf life | Can be stored for 6 months in original package in a dry and tempered area. |
| Color | Grey or white |
| Mix density a b | 1.5 ± 0.05 (fresh mortar) |
| Pull off strength | > 0.5N/mm2 |
| Crack bridging ability 2mm | no sign of crack,loss of |
| Without mesh astm c 836 | adhesion or any other |
| Resistance to positive | NIL |
| Water pressure at 5 bar | and homogeneous using a low speed mechanical stirrer in |
| Presence of water leakage on | NIL |
| The surface of sample during | PRODUCT APPLICATION |
| Test after 28 days bs en | The paste can be applied with a brush, roller or trowel. For a |
| Product type | Waterproofing |
Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberdry 116 FX. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
18 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
powder (A) 13.33 kg + 4.67 kg liquid (B) = 18 kg. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
Can be stored for 6 months in original package in a dry and tempered area. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply weberdry 116 FX, a waterproofing manufactured by Weber (Saint-Gobain). Waterproofing. Allow 1.8 to 3 kg/m2, as published by the manufacturer. Mix at powder (A) 13.33 kg + 4.67 kg liquid (B) = 18 kg. Supplied in 18 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | weberdry 116 FX |
|---|---|
| Manufacturer | Weber (Saint-Gobain) |
| Type | Waterproofing |
| Consumption | 1.8 to 3 kg/m2 |
| Pack size | 18 kg |
| Mixing ratio | powder (A) 13.33 kg + 4.67 kg liquid (B) = 18 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
18 kg
You can download the official weberdry 116 FX technical data sheet as a PDF directly from this page, revision 01.20-A, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

weber Band
View TDS and specifications

weberdry 110 FX
View TDS and specifications

weberdry 130 PR
View TDS and specifications

weberdry 136 FX
View TDS and specifications

weberdry 150 BLC
View TDS and specifications

weberdry 360 PU
View TDS and specifications
All WaterproofingEvery Weber product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
weberdry 116 FX in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberdry 116 FX you need, or describe the job and we will work it out with you.