Biogel Extreme tile adhesive pack
Kerakoll's own picture. The pack we stock: 10 kg.

Kerakoll Tile AdhesiveNo. 01 / 30

Biogel Extreme Technical Data Sheet (TDS)

Highly deformable and workable, hybrid gel adhesive, bonds everything and is tested under the most extreme working conditions

Biogel Extreme is the long working time grade of the Biogel gel adhesives, a hybrid product Kerakoll describes as highly deformable and workable and as tested under the most extreme working conditions. The figures justify the name: a pot life of 110 minutes and an open time of 180 minutes, with coverage of 1.45 kg per square metre and a 24 month shelf life.

  • Large format tile and slab work
  • Laying porcelain and ceramic
  • Laying natural stone
  • Tiling in hot conditions
  • Work needing a long open time
Data sheet0.3 MB

Build a list across products and send it once, or ask about Biogel Extreme on WhatsApp now.

Class
R2
Consumption
1.45 kg/m² per mm
Pack we stock
10 kg
Thickness
2 to 15 mm

About Biogel Extreme

Open time is the figure that governs a large format job, because it sets how long a spread bed stays able to wet the back of a tile. Deformability matters for the same tiles, since a large slab moves more than a small one. In the current Kerakoll range H40 Extreme is the replacement for this product, so check availability before specifying it by name.

Documentation

Related documentation

  • Technical data sheet

    0.3 MB · PDF

    Biogel Extreme as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 2 to 15 mm.

As published in the data sheet

218kg

  • 1.45 kg/m2 per mm
  • 3 mm thick
  • over 50 m2

Order 22 packs of 10 kg monopack, 8.6 kg plus 1.4 kg

Send this quantity for a quote

Taken from the Biogel Extreme data sheet: Coverage per mm of thickness: approx. 1.45 kg/m2. Thickness from 2 to 15 mm. Rate is for the mixed A plus B product. No site allowance is added unless you turn one on. Two component sold as a single pack with part B inside it, 8.6 kg plus 1.4 kg, so the figure is for the mixed product and a pack is the whole 10 kg. Values taken at +23 C, 50 percent relative humidity and no ventilation. The sheet says the figure can vary with site temperature, ventilation, substrate absorbency and the format of the tile.

Application

Where it is used.

  1. 01Large format tile and slab work
  2. 02Laying porcelain and ceramic
  3. 03Laying natural stone
  4. 04Tiling in hot conditions
  5. 05Work needing a long open time

Specification

Technical data.

  • R2
  • EN 12004 and ISO 13007
Biogel Extreme technical specifications from the manufacturer TDS
Coverage1.45 kg/m2
Pack sizemonopack 10 kg (8.6 +1.4 kg)
Pot life110 min
Open time180 min
Set to light foot traffic4 h
Mixing ratioPart A : Part B = 8.6 : 1.4
Application temperature+5 deg C to +35 deg C
ConsistencyPart A white paste / Part B white paste
Storage and shelf life24 months
Product typeHighly deformable and workable, hybrid gel adhesive, bonds everything and is tested under the most extreme working conditions
Thickness2 to 15 mm

Typical values as Kerakoll prints them in the data sheet for Biogel Extreme. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

monopack 10 kg (8.6 +1.4 kg). Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

Part A : Part B = 8.6 : 1.4. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

110 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

24 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Biogel Extreme, a tile adhesive manufactured by Kerakoll, classified R2. Highly deformable and workable, hybrid gel adhesive, bonds everything and is tested under the most extreme working conditions. Allow 1.45 kg/m2 per mm, as published by the manufacturer. Applied thickness 2 to 15 mm. Mix at Part A : Part B = 8.6 : 1.4. Supplied in monopack 10 kg (8.6 +1.4 kg). Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Biogel Extreme
ProductBiogel Extreme
ManufacturerKerakoll
TypeTile Adhesive
ClassificationR2
Consumption1.45 kg/m2 per mm
Thickness2 to 15 mm
Pack sizemonopack 10 kg (8.6 +1.4 kg)
Mixing ratioPart A : Part B = 8.6 : 1.4
Set time4 h
Pot life110 min
Open time180 min
Unit of measurementm2

Frequently Asked Questions

Biogel Extreme is classified R2 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: 1.45 kg/m2

monopack 10 kg (8.6 +1.4 kg)

You can download the official Biogel Extreme technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Biogel Extreme in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biogel Extreme you need, or describe the job and we will work it out with you.

Chat on WhatsApp