Fuga-Shock grout pack
Kerakoll's own picture. The pack we stock: 1 l.

Kerakoll GroutNo. 06 / 30

Fuga-Shock Technical Data Sheet (TDS)

Ready-to-use cleaner for removing residues and streaks of epoxy resins

Fuga-Shock is a ready to use cleaner for a narrow and awkward job: taking cured residues and streaks of epoxy resin off a tiled surface after grouting. Epoxy haze is nothing like cement film.

  • Removing epoxy resin residues
  • Clearing epoxy streaks from tiles
  • Clean down after epoxy grouting
  • Spot cleaning hardened resin haze
Data sheet0.2 MB

Build a list across products and send it once, or ask about Fuga-Shock on WhatsApp now.

Consumption
0.025 to 0.05 L/m²
Pack we stock
1 l
Colour
alterations in the grout

About Fuga-Shock

It does not dissolve in water or answer to an acid wash, so without a product formulated for it the only options left are abrasive and risk marking the tile. Ready to use means there is no dilution to judge, which helps because the window for easy removal closes as the resin hardens. Shelf life is stated as 24 months. The practical point is timing. Clean epoxy grout residue as the work proceeds, bay by bay, and keep this on site for the streaks found afterwards rather than relying on it to rescue a whole floor.

Documentation

Related documentation

  • Technical data sheet

    0.2 MB · PDF

    Fuga-Shock as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Trowel or method

As published in the data sheet

2.50litres

  • Diluted 1:1: 0.05 litre/m2
  • over 50 m2

Order 3 packs of 1 litre bottle

Send this quantity for a quote

Taken from the Fuga-Shock data sheet: Coverage: approx 20 m2 per 1 litre at 1:1 dilution, approx 40 m2 per 1 litre at 1:3 dilution. No site allowance is added unless you turn one on. A cleaner for epoxy residues and streaks, not a grout, so it is priced per square metre of surface cleaned. Water dilution ratios printed are 1:1 to 1:3; the stronger 1:1 mix is the default so the quantity does not fall short.

Application

Where it is used.

  1. 01Removing epoxy resin residues
  2. 02Clearing epoxy streaks from tiles
  3. 03Clean down after epoxy grouting
  4. 04Spot cleaning hardened resin haze

Where it is not the right product

  • Where the joint meets chemicals or constant water, which calls for an epoxy grout

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • EN 13888 and ISO 13007
Fuga-Shock technical specifications from the manufacturer TDS
Pack size1 litre
Coloursalterations in the grout
Application temperature+5 deg C to +35 deg C
ConsistencyTransparent liquid
Storage and shelf life24 months
Product typeReady-to-use cleaner for removing residues and streaks of epoxy resins

Typical values as Kerakoll prints them in the data sheet for Fuga-Shock. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

1 litre. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

24 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Fuga-Shock, a grout manufactured by Kerakoll. Ready-to-use cleaner for removing residues and streaks of epoxy resins. Allow 0.025 to 0.05 L/m2, as published by the manufacturer. Supplied in 1 litre. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Fuga-Shock
ProductFuga-Shock
ManufacturerKerakoll
TypeGrout
Consumption0.025 to 0.05 L/m2
Pack size1 litre
Unit of measurementm2

Frequently Asked Questions

1 litre

You can download the official Fuga-Shock technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Fuga-Shock in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Fuga-Shock you need, or describe the job and we will work it out with you.

Chat on WhatsApp