
Kerakoll GroutNo. 04 / 30
Epofill Technical Data Sheet (TDS)
Hyperfluid epoxy system for the injection of cracks and grouting on concrete
A hyperfluid epoxy injection system, Epofill is made to travel into cracks in concrete and fill them, and it is also used for grouting on concrete. Its CE marking is to EN 1504-5, the European standard for concrete injection products, which tells a specifier it has been tested as a crack filling resin rather than sold on description alone.
- Injection of cracks in concrete
- Grouting on concrete
- Concrete repair to EN 1504-5
- Filling fine cracks before overlay
Build a list across products and send it once, or ask about Epofill on WhatsApp now.
- Class
- EN 1504-5
- Consumption
- 1.1 kg per litre of void
- Pack we stock
- 0.66 kg
- Colour
- part A: transparent liquid, part B yellow-coloured liquid
About Epofill
Hyperfluid matters because a resin that will not flow leaves voids behind, and a partly filled crack restores nothing. Pot life is stated as 80 minutes, so a batch has to be placed inside that window. Supplied in a 0.66 kg bucket with a 12 month shelf life. In UAE conditions the stated pot life shortens as material and ambient temperatures rise, so mix small quantities and keep the unmixed components out of direct sun.
Documentation
Related documentation
Technical data sheet
0.2 MB · PDF
Epofill as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
Cracks and holes are cut out to a square section before filling, so the width and the depth are the chase you prepare, not the crack you found.
As published in the data sheet
1.10kg
- 10 by 10 mm chase over 10 m is 1 litres to fill
- 1.1 kg per litre of void
Order 2 packs of 0.99 kg kit, 0.66 kg part A plus 0.33 kg part B
Taken from the Epofill data sheet: Technical Data: Coverage approx. 1.1 kg/dm3 of cracks to be injected. Pack: part A 0.66 kg bucket / part B 0.33 kg bottle, mixing ratio 2 : 1. No site allowance is added unless you turn one on. The sheet prints the coverage per cubic decimetre of crack but no crack section, so the 10 by 10 mm chase these controls start from is a bound we supply and the sheet does not print. Flare the crack with a sander as the sheet asks, measure what you have opened up, and put those figures in.
Application
Where it is used.
- 01Injection of cracks in concrete
- 02Grouting on concrete
- 03Concrete repair to EN 1504-5
- 04Filling fine cracks before overlay
Where it is not the right product
- Where the joint meets chemicals or constant water, which calls for an epoxy grout
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- EN 1504-5
- EN 13888 and ISO 13007
| Classification | EN 1504-5 |
|---|---|
| Pack size | 0.66 kg bucket |
| Pot life | 80 min |
| Colours | part A: transparent liquid, part B yellow-coloured liquid |
| Mixing ratio | part A : part B = 2 : 1 |
| Application temperature | +5 deg C to +35 deg C |
| Consistency | part A: transparent liquid, part B yellow-coloured liquid |
| Storage and shelf life | 12 months |
| Product type | Hyperfluid epoxy system for the injection of cracks and grouting on concrete |
Typical values as Kerakoll prints them in the data sheet for Epofill. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
0.66 kg bucket. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
part A : part B = 2 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
80 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Epofill, a grout manufactured by Kerakoll, classified EN 1504-5. Hyperfluid epoxy system for the injection of cracks and grouting on concrete. Allow 1.1 kg per litre of void, as published by the manufacturer. Mix at part A : part B = 2 : 1. Supplied in 0.66 kg bucket. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Epofill |
|---|---|
| Manufacturer | Kerakoll |
| Type | Grout |
| Classification | EN 1504-5 |
| Consumption | 1.1 kg per litre of void |
| Pack size | 0.66 kg bucket |
| Mixing ratio | part A : part B = 2 : 1 |
| Pot life | 80 min |
| Unit of measurement | m2 |
Frequently Asked Questions
Epofill is classified EN 1504-5 according to EN 13888 and ISO 13007, as stated in the manufacturer's technical data sheet.
0.66 kg bucket
You can download the official Epofill technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biogel Extreme
R2
View TDS and specifications

Biogel No Limits
C2 TE S1
View TDS and specifications

Delta Plus
View TDS and specifications

Fuga-Remove
View TDS and specifications

Fuga-Shock
View TDS and specifications

Fuga-Soap
View TDS and specifications
All Tile Adhesives and GroutsEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
A grouting float packs the joint without voids, and a cleaning float takes the haze off before it hardens.
View the range
Peygran
Spacers
The spacer sets the joint width, which decides the grout grade and how much of it the job takes.
View the range
Keiser
Mixing Applications
Mixing to the same water every time is what keeps the colour even from batch to batch.
View the range
Epofill in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Epofill you need, or describe the job and we will work it out with you.