
Kerakoll AccessoryNo. 05 / 30
Fuga-Remove Technical Data Sheet (TDS)
Scraper for joints
Removing old grout is the job nobody budgets for, and doing it with the wrong tool costs more than the tool. Fuga-Remove is a hand scraper for joints from 1 to 5 mm wide, with a tungsten carbide coated blade and a plastic handle shaped to let you pull along a joint rather than push across it.
- removing old grout before regrouting with Fugalite
- cleaning residual adhesive from joints before grouting
- opening a failed joint on a small repair
- raking out a joint between 1 and 5 mm wide
- preparing a joint for a colour change
Build a list across products and send it once, or ask about Fuga-Remove on WhatsApp now.
About Fuga-Remove
One, two or three blades are fitted to suit the joint width. Slide it lightly to clean a joint of adhesive residue before grouting, or firmly to take out old grout before regrouting with Fugalite. The sheet is blunt about the risk: high pressure or careless use will damage the tile, not just the joint. Vacuum the dust out before any new grout goes in, because a dusty joint is a weak one.
Documentation
Related documentation
Technical data sheet
0.1 MB · PDF
Fuga-Remove as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
A hand tool, a tungsten carbide coated scraper for raking out joints of 1 to 5 mm, so there is no consumption figure to publish. It is ordered per piece.
There is no area calculator for Fuga-Remove because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01removing old grout before regrouting with Fugalite
- 02cleaning residual adhesive from joints before grouting
- 03opening a failed joint on a small repair
- 04raking out a joint between 1 and 5 mm wide
- 05preparing a joint for a colour change
Specification
Technical data.
| Joint width | 1 to 5 mm |
|---|---|
| Product type | Scraper for joints |
| Blade | tungsten carbide coated, use 1, 2 or 3 blades to suit the joint |
| Handle | ergonomic plastic |
Typical values as Kerakoll prints them in the data sheet for Fuga-Remove. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
For quantity surveyors
BOQ clause.
Supply and apply Fuga-Remove, a accessory manufactured by Kerakoll. Scraper for joints. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Fuga-Remove |
|---|---|
| Manufacturer | Kerakoll |
| Type | Accessory |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 1 to 5 mm
You can download the official Fuga-Remove technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biogel Extreme
R2
View TDS and specifications

Biogel No Limits
C2 TE S1
View TDS and specifications

Delta Plus
View TDS and specifications

Epofill
EN 1504-5
View TDS and specifications

Fuga-Shock
View TDS and specifications

Fuga-Soap
View TDS and specifications
All Tile Adhesives and GroutsEvery Kerakoll product and the distributor page
Fuga-Remove in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Fuga-Remove you need, or describe the job and we will work it out with you.