Pragma Easy tile adhesive pack
Kerakoll's own picture. The pack we stock: 25 kg.

Kerakoll Tile AdhesiveNo. 21 / 30

Pragma Easy Technical Data Sheet (TDS)

Mineral adhesive with high adhesion and extended open time

Pragma Easy is the entry point of the Pragma mineral adhesives, classified C1 E. C1 marks normal rather than improved adhesion, which suits absorbent ceramic tiles that draw water from the bed as the bond forms, and makes it the economical answer for standard ceramic work.

  • Laying absorbent ceramic tiles
  • Internal wall tiling
  • Internal floor tiling
  • Large floors needing extended open time
Data sheet0.3 MB

Build a list across products and send it once, or ask about Pragma Easy on WhatsApp now.

Class
C1 E
Consumption
1.25 kg/m² per mm
Pack we stock
25 kg
Colour
white and grey pre-mixed powder

About Pragma Easy

It is the wrong choice under porcelain, which absorbs almost nothing and needs a C2 grade. The E is extended open time, stated at 30 minutes, and that is the practical benefit on a large floor where a standard adhesive skins over before the tiler gets back to it. Supplied in 25 kg bags with a pot life of 4 hours and a 12 month shelf life. Store the bags off the floor and away from humidity, because a mineral adhesive that has taken up moisture will not reach its stated strength.

Documentation

Related documentation

  • Technical data sheet

    0.3 MB · PDF

    Pragma Easy as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 2 to 10 mm.

As published in the data sheet

188kg

  • 1.25 kg/m2 per mm
  • 3 mm thick
  • over 50 m2

Order 8 packs of 25 kg bag

Send this quantity for a quote

Taken from the Pragma Easy data sheet: Coverage per mm of thickness: approx. 1.25 kg/m2. Maximum thickness obtainable 10 mm. No site allowance is added unless you turn one on. The sheet gives only a maximum thickness of 10 mm, no minimum, so the 2 mm floor and the 3 mm default are the calculator's own. Also supplied in 20 kg bags, change the pack size if you quote the 20 kg. Values taken at +23 C, 50 percent relative humidity and no ventilation. The sheet says the figure can vary with site temperature, ventilation, substrate absorbency and the format of the tile.

Application

Where it is used.

  1. 01Laying absorbent ceramic tiles
  2. 02Internal wall tiling
  3. 03Internal floor tiling
  4. 04Large floors needing extended open time

Where it is not the right product

  • Under porcelain or any tile with very low water absorption, which needs a C2 adhesive
  • For large format tiles, where a deformable C2 S1 or S2 adhesive is required
  • On facades or substrates that move, which need a deformable adhesive

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • C1 E
  • EN 12004 and ISO 13007
Pragma Easy technical specifications from the manufacturer TDS
ClassificationC1 E
Coverageper mm of thickness ≈ 1.25 kg/m²
Pack size20 and 25 kg bags
Pot life4 h
Open time30 min
Set to light foot traffic20 h
Colourswhite and grey pre-mixed powder
Mixing ratioGrey & White 7 to 7.8 l / 25 kg bag
Application temperature+5 deg C to +40 deg C
Consistencywhite and grey pre-mixed powder
Storage and shelf life12 months
Product typeMineral adhesive with high adhesion and extended open time

Typical values as Kerakoll prints them in the data sheet for Pragma Easy. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

20 and 25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

Grey & White 7 to 7.8 l / 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

4 h. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Pragma Easy, a tile adhesive manufactured by Kerakoll, classified C1 E. Mineral adhesive with high adhesion and extended open time. Allow 1.25 kg/m2 per mm, as published by the manufacturer. Mix at Grey & White 7 to 7.8 l / 25 kg bag. Supplied in 20 and 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Pragma Easy
ProductPragma Easy
ManufacturerKerakoll
TypeTile Adhesive
ClassificationC1 E
Consumption1.25 kg/m2 per mm
Pack size20 and 25 kg bags
Mixing ratioGrey & White 7 to 7.8 l / 25 kg bag
Set time20 h
Pot life4 h
Open time30 min
Unit of measurementm2

Frequently Asked Questions

Pragma Easy is classified C1 E according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: per mm of thickness ≈ 1.25 kg/m²

20 and 25 kg bags

You can download the official Pragma Easy technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Pragma Easy in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Pragma Easy you need, or describe the job and we will work it out with you.

Chat on WhatsApp