Paviland Primer Ceramic primer pack
Pidilite Puma's own picture. The pack we stock: 10 kg.

Pidilite Puma PrimerNo. 01 / 5

Paviland Primer Ceramic Technical Data Sheet (TDS)

Pidilite Puma primer.

A primer is chosen by what lies underneath, not by preference, and Paviland Primer Ceramic is the one for a floor that will not absorb anything: an existing ceramic or stoneware tile floor, stoneware, marble, stone, terrazzo, polished cement or very low porosity concrete. It is ready to use and must not be diluted, because the hard red film it leaves carries fine quartz aggregate that gives a cementitious levelling compound something mechanical to grip.

  • Priming existing ceramic and stoneware floors
  • Priming marble, stone and terrazzo
  • Priming polished cement and dense concrete
  • Bonding primer for levelling compounds
  • Floors with subfloor heating systems
  • Mastic asphalt screeds and gypsum fibre boards
Data sheet0.1 MB

Build a list across products and send it once, or ask about Paviland Primer Ceramic on WhatsApp now.

Consumption
0.125 kg/m²
Pack we stock
10 kg
Colour
Red

About Paviland Primer Ceramic

Roll it thin and even with a medium pile roller and leave no puddles. Drying is about 90 minutes on a non-absorbent subfloor and 12 hours on calcium sulphate floors, gypsum fibre boards and sanded mastic asphalt screed. Coverage is 125 g/m2 from a 10 kg jerry can, applied between 15 and 35 degrees Celsius. Lay the levelling compound within 24 hours, while the film is still clean.

Documentation

Related documentation

  • Technical data sheet

    Revision 2026_06 · 0.1 MB · PDF

    Paviland Primer Ceramic as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

6.25kg

  • Single coat by medium pile roller: 0.125 kg/m2
  • over 50 m2

Order 1 pack of 10 kg jerry can

Send this quantity for a quote

Taken from the Paviland Primer Ceramic data sheet: Coverage 125 g/m2, applied as a thin even coat with a medium pile roller. No site allowance is added unless you turn one on. The primer must not be diluted. If the primed surface is left exposed for more than 48 hours or becomes dusty, a fresh coat is required.

Application

Where it is used.

  1. 01Priming existing ceramic and stoneware floors
  2. 02Priming marble, stone and terrazzo
  3. 03Priming polished cement and dense concrete
  4. 04Bonding primer for levelling compounds
  5. 05Floors with subfloor heating systems
  6. 06Mastic asphalt screeds and gypsum fibre boards

Where it is not the right product

  • On external walls, where a cementitious plaster is required
  • In bathrooms, kitchens or any permanently wet area

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

Paviland Primer Ceramic technical specifications from the manufacturer TDS
Coverage125 g/m2
Pack size10 kg
ColoursRed
Application temperaturefrom 15ºC to 35ºC
Storage and shelf lifeStore up to 1 year in its original closed container, away from extreme weather conditions and humidity
Drying time90 min

Typical values as Pidilite Puma prints them in the data sheet for Paviland Primer Ceramic. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

Store up to 1 year in its original closed container, away from extreme weather conditions and humidity in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Paviland Primer Ceramic, a primer manufactured by Pidilite Puma. Allow 0.125 kg/m2, as published by the manufacturer. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Paviland Primer Ceramic
ProductPaviland Primer Ceramic
ManufacturerPidilite Puma
TypePrimer
Consumption0.125 kg/m2
Pack size10 kg
Unit of measurementm2

Frequently Asked Questions

As per the TDS: 125 g/m2

10 kg

You can download the official Paviland Primer Ceramic technical data sheet as a PDF directly from this page, revision 2026_06, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Paviland Primer Ceramic in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Paviland Primer Ceramic you need, or describe the job and we will work it out with you.

Chat on WhatsApp