
Pidilite Puma Self LevellingNo. 05 / 5
Paviland SL 10R Technical Data Sheet (TDS)
Self Levelling to CT C25 F5.
Programme is the reason to choose the R grade. Paviland SL 10R covers the same 2 to 10 mm in one coat as Paviland SL 10 and is classified CT C25 F5, but it sets to light foot traffic in 3 to 4 hours rather than 8 to 12, can be sanded after 4 to 8 hours and takes tiles or fitted carpet from 8 to 12 hours, with subsequent bonding at 12 to 24 hours.
- Fast track indoor floor levelling
- Pumped levelling of larger interior floors
- Floors over radiant underfloor heating
- Levelling concrete and cementitious floors
- Preparation before tiles and fitted carpet
- Preparation before parquet and light floorings
Build a list across products and send it once, or ask about Paviland SL 10R on WhatsApp now.
- Class
- CT C25 F5
- Consumption
- 1.5 kg/m² per mm
- Pack we stock
- 23 kg
- Colour
- GREY powder
About Paviland SL 10R
Setting starts at 20 to 30 minutes, so the discharge area has to be planned and confined before the first bag is opened. It is pumpable, bonds above 2 N/mm2, passes 30 N/mm2 in compression and is rated for use over radiant heating. Mix 5.40 to 5.64 litres of water per 23 kg bag, interior only, between 5 and 40 degrees Celsius.
Documentation
Related documentation
Technical data sheet
Revision 2026_6 · 0.8 MB · PDF
Paviland SL 10R as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 2 to 10 mm.
As published in the data sheet
225kg
- 1.5 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 10 packs of 23 kg bag
Taken from the Paviland SL 10R data sheet: Approximate yield: 1.5 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. The recommended thickness is 2 to 10 mm applied in one coat. The sheet prints the rate with a comma decimal separator, as 1,5 kg/m2.
Application
Where it is used.
- 01Fast track indoor floor levelling
- 02Pumped levelling of larger interior floors
- 03Floors over radiant underfloor heating
- 04Levelling concrete and cementitious floors
- 05Preparation before tiles and fitted carpet
- 06Preparation before parquet and light floorings
Specification
Technical data.
- CT C25 F5
- EN 13813
| Classification | CT C25 F5 |
|---|---|
| Coverage | 1,5 Kg/m2 per mm of thickness |
| Pack size | 23 kg |
| Pot life | 20 - 30 minutes |
| Set to light foot traffic | 3 - 4 hours |
| Colours | GREY powder |
| Bond strength | > 2 N/mm2 |
| Application temperature | from 5ºC to 40ºC |
| Storage and shelf life | 12 months in sealed original packaging, sheltered from weather conditions and humidity |
| Sanding time | 4 - 8 hours |
| Tiling time | 12- 24 hours later |
| Compressive strength | >30 N/mm2 |
Typical values as Pidilite Puma prints them in the data sheet for Paviland SL 10R. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
23 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
20 - 30 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in sealed original packaging, sheltered from weather conditions and humidity in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Paviland SL 10R, a self levelling manufactured by Pidilite Puma, classified CT C25 F5. Allow 1.5 kg/m2 per mm, as published by the manufacturer. Supplied in 23 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Paviland SL 10R |
|---|---|
| Manufacturer | Pidilite Puma |
| Type | Self Levelling |
| Classification | CT C25 F5 |
| Consumption | 1.5 kg/m2 per mm |
| Pack size | 23 kg |
| Set time | 3 - 4 hours |
| Pot life | 20 - 30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Paviland SL 10R is classified CT C25 F5 according to EN 13813, as stated in the manufacturer's technical data sheet.
As per the TDS: 1,5 Kg/m2 per mm of thickness
23 kg
You can download the official Paviland SL 10R technical data sheet as a PDF directly from this page, revision 2026_6, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Paviland SL 10R in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Paviland SL 10R you need, or describe the job and we will work it out with you.



