
Pidilite Puma PrimerNo. 02 / 5
Paviland Primer Epoxy Technical Data Sheet (TDS)
Pidilite Puma primer.
Reach for a resin primer when there is a reason, and here the reason is moisture. Paviland Primer Epoxy is a solvent free and water free two component epoxy that penetrates deeply, strengthens a weak substrate and reduces the vapour diffusion rate on cement and concrete floors holding residual moisture of up to 5 CM per cent, which a dispersion primer cannot do.
- Priming cement floors with residual moisture
- Reducing vapour diffusion beneath levelling compounds
- Strengthening weak or porous substrates
- Priming mastic asphalt and bonded screeds
- Priming calcium sulphate and gypsum fibre boards
- Sand broadcast key before self levelling compounds
Build a list across products and send it once, or ask about Paviland Primer Epoxy on WhatsApp now.
- Consumption
- 0.25 to 0.4 kg/m²
- Pack we stock
- 7.15 kg
- Colour
- Colourless
About Paviland Primer Epoxy
Part B is poured into Part A, 2.85 kg into 7.15 kg, and the mix has 45 minutes at 25 degrees Celsius or 30 minutes at 30. The first coat is rolled at 400 g/m2, the second at 250 g/m2 once eight to ten hours have passed, and Paviland aggregate is broadcast into that wet second coat at 2 to 2.5 kg/m2 to key the levelling compound. Apply between 15 and 35 degrees Celsius.
Documentation
Related documentation
Technical data sheet
Revision 2025_10 · 0.1 MB · PDF
Paviland Primer Epoxy as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
20.0kg
- First coat, by roller: 0.4 kg/m2
- over 50 m2
Order 2 packs of 10 kg kit, 7.15 kg part A plus 2.85 kg part B
Taken from the Paviland Primer Epoxy data sheet: Approximate yield: 1st coat 400 g/m2 when applied with roller, 2nd coat 250 g/m2 when applied with roller. No site allowance is added unless you turn one on. The two coats carry different rates, so price them one at a time. A full two coat system is about 650 g/m2 of primer. While the second coat is still wet the sheet broadcasts Paviland aggregate at 2 to 2.5 kg/m2 until fully saturated, which is a separate product.
Application
Where it is used.
- 01Priming cement floors with residual moisture
- 02Reducing vapour diffusion beneath levelling compounds
- 03Strengthening weak or porous substrates
- 04Priming mastic asphalt and bonded screeds
- 05Priming calcium sulphate and gypsum fibre boards
- 06Sand broadcast key before self levelling compounds
Specification
Technical data.
| Coverage | 1st Coat: 400g/m2 when applied with roller |
|---|---|
| Pack size | 7.15 kg component A, 2.85 kg component B |
| Pot life | 30 min at 30ºC |
| Colours | Colourless |
| Mixing ratio | 7.15 kg: Part A |
| Application temperature | from 15ºC to 35ºC |
| Drying time | 8 hours |
Typical values as Pidilite Puma prints them in the data sheet for Paviland Primer Epoxy. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
7.15 kg component A, 2.85 kg component B. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
7.15 kg: Part A. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
30 min at 30ºC. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
For quantity surveyors
BOQ clause.
Supply and apply Paviland Primer Epoxy, a primer manufactured by Pidilite Puma. Allow 0.25 to 0.4 kg/m2, as published by the manufacturer. Mix at 7.15 kg: Part A. Supplied in 7.15 kg component a, 2.85 kg component b. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Paviland Primer Epoxy |
|---|---|
| Manufacturer | Pidilite Puma |
| Type | Primer |
| Consumption | 0.25 to 0.4 kg/m2 |
| Pack size | 7.15 kg component A, 2.85 kg component B |
| Mixing ratio | 7.15 kg: Part A |
| Pot life | 30 min at 30ºC |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 1st Coat: 400g/m2 when applied with roller
7.15 kg component A, 2.85 kg component B
You can download the official Paviland Primer Epoxy technical data sheet as a PDF directly from this page, revision 2025_10, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Paviland Primer Epoxy in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Paviland Primer Epoxy you need, or describe the job and we will work it out with you.





