
Pidilite Puma Self LevellingNo. 04 / 5
Paviland SL 10 Technical Data Sheet (TDS)
Self Levelling to CT C20 F6.
Classified CT C20 F6 to UNE EN 13813, Paviland SL 10 is the standard grade of the pair: a grey cementitious self levelling compound poured from 2 to 10 mm in a single layer over interior concrete and cementitious floors. A 25 kg bag takes 5.5 to 5.8 litres of water, gives 30 minutes of working time and spreads at 1.5 kg per square metre for every millimetre of thickness.
- Levelling irregular interior floors
- Smoothing residential floors with moderate foot traffic
- Levelling concrete and cementitious substrates
- Preparation before ceramic tiles
- Preparation before parquet flooring
- Preparation before PVC and linoleum
Build a list across products and send it once, or ask about Paviland SL 10 on WhatsApp now.
- Class
- CT C20 F6
- Consumption
- 1.5 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- Grey powder
About Paviland SL 10
It carries light foot traffic after 8 to 12 hours, and the covering follows later: ceramic or carpet 12 to 24 hours after the pour, parquet or synthetic cladding 24 to 48 hours. Compressive strength passes 5 N/mm2 in a day and 20 N/mm2 at 28 days. It is a levelling layer and never a finished floor, so it must be covered, and it wants Paviland Primer R underneath.
Documentation
Related documentation
Technical data sheet
Revision 2025_12 · 0.2 MB · PDF
Paviland SL 10 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 2 to 10 mm.
As published in the data sheet
225kg
- 1.5 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 9 packs of 25 kg bag
Taken from the Paviland SL 10 data sheet: Approximate yield: 1.5 kg/m2 and mm thickness. No site allowance is added unless you turn one on. Application thickness from 2 to 10 mm, with a suggested maximum of around 10 mm in a single layer.
Application
Where it is used.
- 01Levelling irregular interior floors
- 02Smoothing residential floors with moderate foot traffic
- 03Levelling concrete and cementitious substrates
- 04Preparation before ceramic tiles
- 05Preparation before parquet flooring
- 06Preparation before PVC and linoleum
Specification
Technical data.
- CT C20 F6
- EN 13813
| Classification | CT C20 F6 |
|---|---|
| Coverage | 1.5 Kg/m2 and mm thickness |
| Pack size | 25 kg |
| Pot life | 30 minutes |
| Set to light foot traffic | 8- 12 hours |
| Colours | Grey powder |
| Bond strength | >1 N/mm2 |
| Application temperature | from 5ºC to 40ºC |
| Storage and shelf life | 1 year storage in its original packaging, away from extreme weather conditions and humidity |
| Thickness | from 2 to 10 mm |
| Sanding time | 12- 24 hours |
| Tiling time | Ceramic or carpet: 12-24 hours |
| Compressive strength | > 5 N/mm2 (1 d) |
Typical values as Pidilite Puma prints them in the data sheet for Paviland SL 10. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
30 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
1 year storage in its original packaging, away from extreme weather conditions and humidity in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Paviland SL 10, a self levelling manufactured by Pidilite Puma, classified CT C20 F6. Allow 1.5 kg/m2 per mm, as published by the manufacturer. Applied thickness from 2 to 10 mm. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Paviland SL 10 |
|---|---|
| Manufacturer | Pidilite Puma |
| Type | Self Levelling |
| Classification | CT C20 F6 |
| Consumption | 1.5 kg/m2 per mm |
| Thickness | from 2 to 10 mm |
| Pack size | 25 kg |
| Set time | 8- 12 hours |
| Pot life | 30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Paviland SL 10 is classified CT C20 F6 according to EN 13813, as stated in the manufacturer's technical data sheet.
As per the TDS: 1.5 Kg/m2 and mm thickness
25 kg
You can download the official Paviland SL 10 technical data sheet as a PDF directly from this page, revision 2025_12, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Paviland SL 10 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Paviland SL 10 you need, or describe the job and we will work it out with you.



