weberpremix SP 11 plaster pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 50 kg.

Weber (Saint-Gobain) PlasterNo. 02 / 9

weberpremix SP 11 Technical Data Sheet (TDS)

Plasters and renders

weberpremix SP-11 is a cementitious fibre reinforced ready mix plaster used for traditional plastering works in a clean and speedy manner, while keeping a homogeneous mix. Due to its high content in additives, it allows better shrinkage control as well as improved workability, bonding and curing.

  • Plastering and rendering walls
  • Skimming before decoration
Data sheet0.3 MB

Build a list across products and send it once, or ask about weberpremix SP 11 on WhatsApp now.

Consumption
1.6 kg/m² per mm
Pack we stock
50 kg

About weberpremix SP 11

weberpremix SP-11 is recommended for external and internal plastering on block walls, ceilings, concrete surfaces, bricks and for general filling up. weberpremix SP-11 can be applied traditionally by hand or by using modern plaster-spraying machines. It should not be used on painted surfaces or floors. The sheet gives consumption as Approximately 1.6kg per m2 per 1mm thickness. Pot life is given as <2 hours at 20°C. Lapiz Blue supplies weberpremix SP 11 across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 07.25 · 0.3 MB · PDF

    weberpremix SP 11 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 1 to 20 mm.

As published in the data sheet

240kg

  • 1.6 kg/m2 per mm
  • 3 mm thick
  • over 50 m2
Send this quantity for a quote

Taken from the weberpremix SP 11 data sheet: Approximately 1.6kg per m2 per 1mm thickness. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Plastering and rendering walls
  2. 02Skimming before decoration

Specification

Technical data.

  • EN 998-1
weberpremix SP 11 technical specifications from the manufacturer TDS
CoverageApproximately 1.6kg per m2 per 1mm thickness
Pack size50 kg
Pot life<2 hours at 20°C
Mixing ratio7-9 lit/50kg bag
ColorGrey
CompositionPortland cement, selected
Tructions for useDISCLAIMER
Strate preparationWhile the company guarantees its products against defective
Sequent layersthe company’s office in your location.
Product typePlasters and renders

Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberpremix SP 11. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

50 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

7-9 lit/50kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

<2 hours at 20°C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

For quantity surveyors

BOQ clause.

Supply and apply weberpremix SP 11, a plaster manufactured by Weber (Saint-Gobain). Plasters and renders. Allow 1.6 kg/m2 per mm, as published by the manufacturer. Mix at 7-9 lit/50kg bag. Supplied in 50 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for weberpremix SP 11
Productweberpremix SP 11
ManufacturerWeber (Saint-Gobain)
TypePlaster
Consumption1.6 kg/m2 per mm
Pack size50 kg
Mixing ratio7-9 lit/50kg bag
Pot life<2 hours at 20°C
Unit of measurementm2

Frequently Asked Questions

As per the TDS: Approximately 1.6kg per m2 per 1mm thickness

50 kg

You can download the official weberpremix SP 11 technical data sheet as a PDF directly from this page, revision 07.25, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

weberpremix SP 11 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberpremix SP 11 you need, or describe the job and we will work it out with you.

Chat on WhatsApp