
Weber (Saint-Gobain) PlasterNo. 05 / 9
weberpremix SRC 1 Technical Data Sheet (TDS)
Plasters and renders
weberpremix SRC-1 is a ready mixed mortar based on mineral bonding agent used for preparing surfaces before the rendering. It improves the adhesion of the new plaster, cement & gypsum based.
- Plastering and rendering walls
- Skimming before decoration
Build a list across products and send it once, or ask about weberpremix SRC 1 on WhatsApp now.
- Consumption
- 4 kg/m²
- Pack we stock
- 50 kg
About weberpremix SRC 1
It is applied on masonry blocks. CURING Protect the newly applied plaster from sunshine and wind. The new plaster has to be cured with water for at least three days by spraying 3-4 times daily. The sheet gives consumption as Around 4kg/m², depending on the substrate and the application method. It is supplied in the UAE in 50kg. The mixing ratio is Mix a 50kg bag with 9-11lit of potable cool water. Lapiz Blue supplies weberpremix SRC 1 across the UAE from Dubai, Abu Dhabi and Sharjah.
Documentation
Related documentation
Technical data sheet
Revision 03.24 · 0.3 MB · PDF
weberpremix SRC 1 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
200kg
- As the sheet states: 4 kg/m2
- over 50 m2
Order 4 packs of 50 kg bag
Taken from the weberpremix SRC 1 data sheet: Around 4kg/m², depending on the substrate and the application method. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Plastering and rendering walls
- 02Skimming before decoration
Where it is not the right product
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- EN 998-1
| Coverage | Around 4kg/m², depending on the substrate and the application method. |
|---|---|
| Pack size | 50kg |
| Mixing ratio | Mix a 50kg bag with 9-11lit of potable cool water |
| Appearance | Grey granular powder |
| Composition | Portland cement, selected |
| Grain size | 0-3mm |
| Bulk density | 1.5 ± 0.1 |
| Product type | Plasters and renders |
Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberpremix SRC 1. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
50kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
Mix a 50kg bag with 9-11lit of potable cool water. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
For quantity surveyors
BOQ clause.
Supply and apply weberpremix SRC 1, a plaster manufactured by Weber (Saint-Gobain). Plasters and renders. Allow 4 kg/m2, as published by the manufacturer. Mix at Mix a 50kg bag with 9-11lit of potable cool water. Supplied in 50kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | weberpremix SRC 1 |
|---|---|
| Manufacturer | Weber (Saint-Gobain) |
| Type | Plaster |
| Consumption | 4 kg/m2 |
| Pack size | 50kg |
| Mixing ratio | Mix a 50kg bag with 9-11lit of potable cool water |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Around 4kg/m², depending on the substrate and the application method.
50kg
You can download the official weberpremix SRC 1 technical data sheet as a PDF directly from this page, revision 03.24, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

weberpremix Skim Coat
View TDS and specifications

weberpremix SP 11
View TDS and specifications

weberpremix SP 33
View TDS and specifications

weberpremix SP 5
View TDS and specifications

weberpremix SRC 2
Class A1 (fire resistance per EN 998-1)
View TDS and specifications

weberpremix SRC S
View TDS and specifications
All Plasters and RendersEvery Weber product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
weberpremix SRC 1 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberpremix SRC 1 you need, or describe the job and we will work it out with you.