
Weber (Saint-Gobain) PlasterNo. 04 / 9
weberpremix SP 5 Technical Data Sheet (TDS)
Plasters and renders
weberpremix SP-5 is a cementitious fibre reinforced ready mix plaster used for traditional plastering works in a clean an speedy manner, while keeping a homogeneous mix. Due to its high content in additives, it allows better shrinkage control a well as improved workability, bonding and curing.
- Plastering and rendering walls
- Skimming before decoration
Build a list across products and send it once, or ask about weberpremix SP 5 on WhatsApp now.
- Consumption
- 1.6 kg/m² per mm
- Pack we stock
- 50 kg
About weberpremix SP 5
weberpremix SP-5 can be applied traditionally by hand or by using modern plaster-spraying machines. It should not be used on painted surfaces or floors. The sheet gives consumption as Approximately 1.6kg per m2 per 1mm thickness. It is supplied in the UAE in 50kg. Pot life is given as <2 hours @20°C (printed as 'Wet mix life', there is no field literally called 'Pot Life'). The mixing ratio is 7-8lit per 50kg bag. Lapiz Blue supplies weberpremix SP 5 across the UAE from Dubai, Abu Dhabi and Sharjah.
Documentation
Related documentation
Technical data sheet
Revision 09.26 · 0.3 MB · PDF
weberpremix SP 5 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 20 mm.
As published in the data sheet
240kg
- 1.6 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 5 packs of 50 kg bag
Taken from the weberpremix SP 5 data sheet: Approximately 1.6kg per m2 per 1mm thickness. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Plastering and rendering walls
- 02Skimming before decoration
Specification
Technical data.
- EN 998-1
| Coverage | Approximately 1.6kg per m2 per 1mm thickness. |
|---|---|
| Pack size | 50kg |
| Pot life | <2 hours @20°C (printed as 'Wet mix life', there is no field literally called 'Pot Life') |
| Mixing ratio | 7-8lit per 50kg bag |
| Color | Grey |
| Composition | Portland cement, selected |
| Grain size | 0 to 2.5mm |
| Fresh density | 1.55 ± 0.10 |
| Wet mix life | <2 hours @20°C |
| Voc as per method | None (<10g/lit) |
| Product type | Plasters and renders |
Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberpremix SP 5. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
50kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
7-8lit per 50kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
<2 hours @20°C (printed as 'Wet mix life', there is no field literally called 'Pot Life'). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
For quantity surveyors
BOQ clause.
Supply and apply weberpremix SP 5, a plaster manufactured by Weber (Saint-Gobain). Plasters and renders. Allow 1.6 kg/m2 per mm, as published by the manufacturer. Mix at 7-8lit per 50kg bag. Supplied in 50kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | weberpremix SP 5 |
|---|---|
| Manufacturer | Weber (Saint-Gobain) |
| Type | Plaster |
| Consumption | 1.6 kg/m2 per mm |
| Pack size | 50kg |
| Mixing ratio | 7-8lit per 50kg bag |
| Pot life | <2 hours @20°C (printed as 'Wet mix life', there is no field literally called 'Pot Life') |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Approximately 1.6kg per m2 per 1mm thickness.
50kg
You can download the official weberpremix SP 5 technical data sheet as a PDF directly from this page, revision 09.26, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

weberpremix Skim Coat
View TDS and specifications

weberpremix SP 11
View TDS and specifications

weberpremix SP 33
View TDS and specifications

weberpremix SRC 1
View TDS and specifications

weberpremix SRC 2
Class A1 (fire resistance per EN 998-1)
View TDS and specifications

weberpremix SRC S
View TDS and specifications
All Plasters and RendersEvery Weber product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
weberpremix SP 5 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberpremix SP 5 you need, or describe the job and we will work it out with you.