weberpremix SRC 2 plaster pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 50 kg.

Weber (Saint-Gobain) PlasterNo. 06 / 9

weberpremix SRC 2 Technical Data Sheet (TDS)

Plasters and renders

weberpremix SRC-2 is a ready mixed mortar based on mineral bonding agent used for preparing surfaces before the rendering. It improves the adhesion of the new plaster, cement & gypsum based.

  • Plastering and rendering walls
  • Skimming before decoration
Data sheet0.3 MB

Build a list across products and send it once, or ask about weberpremix SRC 2 on WhatsApp now.

Class
Class A1 (fire resistance per EN 998-1)
Consumption
4 kg/m²
Pack we stock
50 kg

About weberpremix SRC 2

weberpremix SRC-2 is specially designed to be applied on normal strength fair faced concrete. Weber states it as Class A1 (fire resistance per EN 998-1). The sheet gives consumption as Around 4kg/m2, depending on the substrate and the application method. It is supplied in the UAE in 50kg. The mixing ratio is 9.75 to 11.75 lit per 50kg bag. Shelf life is 12 months after manufacturing date in the unopened pack. On site it is used for plastering and rendering walls and skimming before decoration. Lapiz Blue supplies weberpremix SRC 2 across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 10.26 · 0.3 MB · PDF

    weberpremix SRC 2 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

200kg

  • As the sheet states: 4 kg/m2
  • over 50 m2

Order 4 packs of 50 kg bag

Send this quantity for a quote

Taken from the weberpremix SRC 2 data sheet: Around 4kg/m2, depending on the substrate and the application method. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Plastering and rendering walls
  2. 02Skimming before decoration

Where it is not the right product

  • On external walls, where a cementitious plaster is required
  • In bathrooms, kitchens or any permanently wet area

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • Class A1 (fire resistance per EN 998-1)
  • EN 998-1
weberpremix SRC 2 technical specifications from the manufacturer TDS
ClassificationClass A1 (fire resistance per EN 998-1)
CoverageAround 4kg/m2, depending on the substrate and the application method.
Pack size50kg
Mixing ratio9.75 to 11.75 lit per 50kg bag
Storage and shelf life12 months after manufacturing date
AppearanceGrey granular powder
CompositionPortland cement, selected
Grain size0 to 3mm
Product typePlasters and renders

Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberpremix SRC 2. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

50kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

9.75 to 11.75 lit per 50kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

12 months after manufacturing date in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply weberpremix SRC 2, a plaster manufactured by Weber (Saint-Gobain), classified Class A1 (fire resistance per EN 998-1). Plasters and renders. Allow 4 kg/m2, as published by the manufacturer. Mix at 9.75 to 11.75 lit per 50kg bag. Supplied in 50kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for weberpremix SRC 2
Productweberpremix SRC 2
ManufacturerWeber (Saint-Gobain)
TypePlaster
ClassificationClass A1 (fire resistance per EN 998-1)
Consumption4 kg/m2
Pack size50kg
Mixing ratio9.75 to 11.75 lit per 50kg bag
Unit of measurementm2

Frequently Asked Questions

weberpremix SRC 2 is classified Class A1 (fire resistance per EN 998-1) according to EN 998-1, as stated in the manufacturer's technical data sheet.

As per the TDS: Around 4kg/m2, depending on the substrate and the application method.

50kg

You can download the official weberpremix SRC 2 technical data sheet as a PDF directly from this page, revision 10.26, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

weberpremix SRC 2 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberpremix SRC 2 you need, or describe the job and we will work it out with you.

Chat on WhatsApp