weberdry Gum waterproofing pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 25 kg.

Weber (Saint-Gobain) WaterproofingNo. 10 / 19

weberdry Gum Technical Data Sheet (TDS)

Waterproofing

weberdry gum is a ready-to-use, acrylic base, solvent free, one component, and yellow-colored paste. It is designed for waterproofing under tiling in wet areas that do not experience long-lasting water ponding.

  • Waterproofing wet areas and roofs
  • Protecting concrete from water ingress
Data sheet0.2 MB

Build a list across products and send it once, or ask about weberdry Gum on WhatsApp now.

Consumption
1.5 to 1.7 kg/m² per mm
Pack we stock
25 kg

About weberdry Gum

It has a good resistance to alkalis, salt solutions & diluted acids, non-hazardous composition with excellent strength & flexible characteristics. weberdry gum has been specifically designed for the long term waterproofing of wet areas including showers, bathrooms, laundries, exterior decks, terraces and balconies. It may be used for the following:; Waterproofing vertical and horizontal surfaces in kitchens before laying tiles, mosaics, stones, etc... It is supplied in the UAE in 25kg. Shelf life is up to one year in the unopened pack. Lapiz Blue supplies weberdry Gum across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 11.25 · 0.2 MB · PDF

    weberdry Gum as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 1 to 20 mm.

As published in the data sheet

225 to 255kg

  • 1.5 to 1.7 kg/m2 per mm
  • 3 mm thick
  • over 50 m2

Order 9 to 11 packs of 25 kg bag

Send this quantity for a quote

Taken from the weberdry Gum data sheet: 1.5-1.7kg/m2/1mm WFT (Depending on the type of the substrate quality and method of application). No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Waterproofing wet areas and roofs
  2. 02Protecting concrete from water ingress

Specification

Technical data.

  • EN 14891
weberdry Gum technical specifications from the manufacturer TDS
Pack size25kg
ConsistencyPaste
Storage and shelf lifeup to one year
ColorYellow
Density1.35 - 1.45
Solid contentApprox. 72%
Elongation200%
Product typeWaterproofing

Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberdry Gum. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

up to one year in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply weberdry Gum, a waterproofing manufactured by Weber (Saint-Gobain). Waterproofing. Allow 1.5 to 1.7 kg/m2 per mm, as published by the manufacturer. Supplied in 25kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for weberdry Gum
Productweberdry Gum
ManufacturerWeber (Saint-Gobain)
TypeWaterproofing
Consumption1.5 to 1.7 kg/m2 per mm
Pack size25kg
Unit of measurementm2

Frequently Asked Questions

25kg

You can download the official weberdry Gum technical data sheet as a PDF directly from this page, revision 11.25, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

weberdry Gum in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberdry Gum you need, or describe the job and we will work it out with you.

Chat on WhatsApp