
Weber (Saint-Gobain) WaterproofingNo. 11 / 19
weberdry Prime 338 Technical Data Sheet (TDS)
Waterproofing
weberdry prime 338 is water based acrylic co-polymer primer and bonding compound developed to assist in adhesion and preparation of concrete walls and floors for the application of acrylic waterproofing products. weberdry prime 338 is used for priming for concrete substrate, gypsum substrate.
- Waterproofing wet areas and roofs
- Protecting concrete from water ingress
Build a list across products and send it once, or ask about weberdry Prime 338 on WhatsApp now.
- Consumption
- 100 to 300 kg/m²
- Pack we stock
- 5 kg
About weberdry Prime 338
It can also be applied on gypsum boards. The sheet gives consumption as 100 to 300ml/m2 depending on the roughness and absorbency of the substrate. It is supplied in the UAE in 5kg, 20kg. Shelf life is 6 months in the unopened pack. On site it is used for waterproofing wet areas and roofs and protecting concrete from water ingress. weberdry Prime 338 sits in Weber's waterproofing range, made for the Gulf by Saint-Gobain through SODAMCO. Lapiz Blue supplies weberdry Prime 338 across the UAE from Dubai, Abu Dhabi and Sharjah.
Documentation
Related documentation
Technical data sheet
Revision 08.15 · 0.2 MB · PDF
weberdry Prime 338 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
5,000 to 15,000kg
- As the sheet states: 100 to 300 kg/m2
- over 50 m2
Order 1000 to 3000 packs of 5 kg bag
Taken from the weberdry Prime 338 data sheet: 100 to 300ml/m2 depending on the roughness and absorbency of the substrate. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Waterproofing wet areas and roofs
- 02Protecting concrete from water ingress
Where it is not the right product
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- EN 14891
| Coverage | 100 to 300ml/m2 depending on the roughness and absorbency of the substrate |
|---|---|
| Pack size | 5kg, 20kg |
| Storage and shelf life | 6 months |
| Appearance | White liquid |
| Density kg lit | App. 1 |
| Ph | 8±1 |
| Application temperature range | +5°C to +40°C |
| Product type | Waterproofing |
Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberdry Prime 338. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5kg, 20kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
6 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply weberdry Prime 338, a waterproofing manufactured by Weber (Saint-Gobain). Waterproofing. Allow 100 to 300 kg/m2, as published by the manufacturer. Supplied in 5kg, 20kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | weberdry Prime 338 |
|---|---|
| Manufacturer | Weber (Saint-Gobain) |
| Type | Waterproofing |
| Consumption | 100 to 300 kg/m2 |
| Pack size | 5kg, 20kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 100 to 300ml/m2 depending on the roughness and absorbency of the substrate
5kg, 20kg
You can download the official weberdry Prime 338 technical data sheet as a PDF directly from this page, revision 08.15, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

weber Band
View TDS and specifications

weberdry 110 FX
View TDS and specifications

weberdry 116 FX
View TDS and specifications

weberdry 130 PR
View TDS and specifications

weberdry 136 FX
View TDS and specifications

weberdry 150 BLC
View TDS and specifications
All WaterproofingEvery Weber product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
weberdry Prime 338 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberdry Prime 338 you need, or describe the job and we will work it out with you.