weberdry Prime SB waterproofing pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 200 l.

Weber (Saint-Gobain) WaterproofingNo. 12 / 19

weberdry Prime SB Technical Data Sheet (TDS)

Waterproofing

weberdry prime SB is solvent-based primer, used for the preparation of surface to be waterproofed, with the aim of improving adherence of the waterproofing bituminous membranes to the substrate. The product can be applied on the majority of traditional surface in building.

  • Waterproofing wet areas and roofs
  • Protecting concrete from water ingress
Data sheet0.2 MB

Build a list across products and send it once, or ask about weberdry Prime SB on WhatsApp now.

Consumption
0.2 to 0.3 kg/m²
Pack we stock
200 l

About weberdry Prime SB

The sheet gives consumption as around 0.2-0.3L/m2 per coat. On site it is used for waterproofing wet areas and roofs and protecting concrete from water ingress. weberdry Prime SB sits in Weber's waterproofing range, made for the Gulf by Saint-Gobain through SODAMCO. Lapiz Blue holds Weber's authorised distributor letter, so the current sheet, the stock position and the lead time can all be confirmed before you specify it. Lapiz Blue supplies weberdry Prime SB across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 10.24 · 0.2 MB · PDF

    weberdry Prime SB as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

10.0 to 15.0kg

  • around 0.2-0.3L/m2 per coat: 0.2 to 0.3 kg/m2
  • over 50 m2
Send this quantity for a quote

Taken from the weberdry Prime SB data sheet: around 0.2-0.3L/m2 per coat. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Waterproofing wet areas and roofs
  2. 02Protecting concrete from water ingress

Specification

Technical data.

  • EN 14891
weberdry Prime SB technical specifications from the manufacturer TDS
Coveragearound 0.2-0.3L/m2 per coat
Pack size200 litre
AppearanceBlack colored liquid
Density at 25 c0.90±0.05 g/cm³
Flash pointMin. 38°C
Water solubilityInsoluble
Characteristicsweberdry prime SB is supplied ready to use and is cold applied
Benzene solubilitySoluble
Product typeWaterproofing

Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberdry Prime SB. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

200 litre. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

For quantity surveyors

BOQ clause.

Supply and apply weberdry Prime SB, a waterproofing manufactured by Weber (Saint-Gobain). Waterproofing. Allow 0.2 to 0.3 kg/m2, as published by the manufacturer. Supplied in 200 litre. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for weberdry Prime SB
Productweberdry Prime SB
ManufacturerWeber (Saint-Gobain)
TypeWaterproofing
Consumption0.2 to 0.3 kg/m2
Pack size200 litre
Unit of measurementm2

Frequently Asked Questions

As per the TDS: around 0.2-0.3L/m2 per coat

200 litre

You can download the official weberdry Prime SB technical data sheet as a PDF directly from this page, revision 10.24, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

weberdry Prime SB in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberdry Prime SB you need, or describe the job and we will work it out with you.

Chat on WhatsApp