weberdry RBE waterproofing pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 200 l.

Weber (Saint-Gobain) WaterproofingNo. 14 / 19

weberdry RBE Technical Data Sheet (TDS)

Waterproofing

weberdry RBE is a rubberized bitumen emulsion with excellent adhesion to most building substrates. It dries to form a black flexible coating.

  • Waterproofing wet areas and roofs
  • Protecting concrete from water ingress
Data sheet0.2 MB

Build a list across products and send it once, or ask about weberdry RBE on WhatsApp now.

Consumption
0.333 to 1 L/m²
Pack we stock
200 l

About weberdry RBE

It may be applied to damp surfaces such as green concrete but not waterlogged surfaces. Cementitious surfaces must be dampened with clean cold water to facilitate application. Care should be taken to remove excess water before application. The sheet gives consumption as 1 to 3m2/Liter per coat. It is supplied in the UAE in 200L. Shelf life is 12 months in the unopened pack. Lapiz Blue supplies weberdry RBE across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 04.16 · 0.2 MB · PDF

    weberdry RBE as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

16.7 to 50.0litres

  • 1 to 3m2/Liter per coat: 0.3333 to 1 litre/m2
  • over 50 m2

Order 1 pack of 200 litre pail

Send this quantity for a quote

Taken from the weberdry RBE data sheet: 1 to 3m2/Liter per coat. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Waterproofing wet areas and roofs
  2. 02Protecting concrete from water ingress

Specification

Technical data.

  • EN 14891
weberdry RBE technical specifications from the manufacturer TDS
Coverage1 to 3m2/Liter per coat
Pack size200L
Application temperature+5°C to +45°C
Storage and shelf life12 months
ColorDark brown, dries to black
Specific gravity0.90kg/L
Solids content38% min
Polymer content10% min
Drying time2hrs at 35°C
Recoat time6hrs at 35°C
Viscosity astm d 298310-30 poises
Cement and as a vapor barrierstable with an even finish and free from dirt, dust, loose debris,
Product typeWaterproofing

Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberdry RBE. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

200L. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply weberdry RBE, a waterproofing manufactured by Weber (Saint-Gobain). Waterproofing. Allow 0.333 to 1 L/m2, as published by the manufacturer. Supplied in 200l. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for weberdry RBE
Productweberdry RBE
ManufacturerWeber (Saint-Gobain)
TypeWaterproofing
Consumption0.333 to 1 L/m2
Pack size200L
Unit of measurementm2

Frequently Asked Questions

As per the TDS: 1 to 3m2/Liter per coat

200L

You can download the official weberdry RBE technical data sheet as a PDF directly from this page, revision 04.16, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

weberdry RBE in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberdry RBE you need, or describe the job and we will work it out with you.

Chat on WhatsApp